How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 22654
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

How to remove multifunction switch 2006 Dodge Stratus

Customer Question

How to remove multifunction switch 2006 Dodge Stratus
Submitted: 6 years ago.
Category: Dodge
Expert:  sprinkles08 replied 6 years ago.

Hello and welcome to JustAnswer!


The multifunction switch on your car isn't hard to remove.


Start by removing the steering column shrouds. There are screws up from the bottom side and then the shroud halves will unsnap from each other.


Once the shrouds are off you'll see the switch. Unplug the electrical connector and remove the two Torx screws that hold the switch to the steering column, lift the switch straight up to remove it.


The combination flasher is on the back of the switch and won't come with the replacement switch. Be sure to swap the flasher over to your new switch before installing it.