Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Locating downstream O2 sensors on my 2010 V6 dodge dakota.
Locating downstream O2 sensors on my 2010 V6 dodge dakota … read more
Bart
Bart
Master Automotive Technician
High School Diploma
3,966 satisfied customers
P0152 bank 2 sensor 1 voltage high. Bank 2 sensors 1&2 are
p0152 bank 2 sensor 1 voltage high. Bank 2 sensors 1&2 are both very slow to get below 1.27v. more than 5 minutes. will not go to closed loop most of the time. … read more
kevinf630
kevinf630
owner
high school
193 satisfied customers
I need the bolts for a dodge dakota 2006 3.7 V6 exhaust
I need the bolts for a dodge dakota 2006 3.7 V6 exhaust manifold … read more
Chris
Chris
Shop Foreman
8,691 satisfied customers
2010 dodge Dakota 3.7 liter code P0139 bank 1 sensor 2 slow
2010 dodge Dakota 3.7 liter code P0139 bank 1 sensor 2 slow response. Just got done testing power and ground from harness to sensor, I have 4.5 volts and the 2.5 volts, then checking pulse width. No p… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
7,419 satisfied customers
No power to o2 sensors. Consistent. 2003 dodge dakota.
changed engine from 3.7 to 5.9 and changed ecm also … read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
9,413 satisfied customers
Getting a 1762 code manifactures control transmission. Po
getting a 1762 code manifactures control transmission … read more
william readon
william readon
NONE
1,899 satisfied customers
I am getting the code p2010 and p0032 I have replaced both
I am getting the code p2010 and p0032 I have replaced both the intake manifold part and the o2 sensor … read more
Robert R
Robert R
Auto Technician
Vocational, Technical or Trade Scho
5,704 satisfied customers
I have a 2006 Dodge Dakota 3.7 and both bank one and bank
Hi. I have a 2006 Dodge Dakota 3.7 and both bank one and bank two sensors are setting codes one or the other most every day now. Doesn't seem to me that both cats or sensors went bad together.… read more
william readon
william readon
NONE
1,899 satisfied customers
2000 dodge dakota abs how to test, as I was coming home today
2000 dodge dakota abs how to test, as I was coming home today the brake pedal felt a little spongy so as I am sitting at the light I pumped the pedal sevral times and when I did so the abs and e brake… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,479 satisfied customers
DodgeDakota: I have a 2006 Dodge Dakota and the 42rle transmission
I have a 2006 Dodge Dakota and the 42rle transmission is stuck in second gear Like what else do you want to know… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,479 satisfied customers
2006 dodge dakota slt: 02 senser..02 sensors..gas mileage..000 miles
2006 dodge dakota slt 3.7 got a code that 02 senser is bad this engine has four 02 sensors how can i tell which one is bad and does it affect gas mileage at all only has 52,000 miles is that normal fo… read more
hauto
hauto
tech
Bachelor's Degree
2,729 satisfied customers
2003 dodge caravan: a couple mechanics..cuts..sluggish..vacuum
2003 dodge caravan, engine light has been on for a little while, hooked up scanner reader and code p0171 comes up, have talked to a couple mechanics and everyone has a different store, it starts ruff … read more
david
david
Heavy Duty Repair Mechanic
Vocational, Technical or Trade Scho
500 satisfied customers
Dodge dakota: auto zone..p0457 and also seat belt light stays..air bag
i have a 05 dodge dakota with engine light on codes given to by auto zone are p2098,p0430,p0457 and also seat belt light stays on with belt on and will sound for first 5 minutes or so and also last bu… read more
Amedee
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
24,644 satisfied customers
2004 Dodge Intrepid SXT: Check engine light on constantly..diagnose
2004 Dodge Intrepid SXT with 250HP 24V Engine. Check engine light on constantly. Bought a ODBCOM system online to diagnose. ODBCOM system says P0138 (Bank1 Sensor2) High voltage. Watched the raw data … read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
Dakota: 2wd..the temp is cold out(50 or less) the truck acts like your
I have an 01 Dakota 4.7 2wd. When the temp is cold out(50 or less) the truck acts like your turning the ignition off and on again many times really fast.. The speedo, tack drop and it feels like its l… read more
Chris
Chris
Shop Foreman
8,691 satisfied customers
2004 Ram 1500: 3.7 / V6 and after replace the O2 sensor..circuit high
I have a 2004 Ram 1500 - 3.7 / V6 and after replace the O2 sensor B2S2 the scan is showing the code P0058 O2S B2S2 heater circuit high. Any tip to help me?… read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,778 satisfied customers
DAKOTA: V..REBUILT..NEW ENGINE..CAM SENSOR ON R-f eng AND R-R BY FLY
I HAVE A DAKOTA V-6 3.7 LTR THAT I REPLACED ENGINE IN. I PURCHESED A REBUILT ENG FOR A LIBERTY OR DAKOTA 2004 3.7 AND THE NEW ENGINE WON''T GO OVER 2200 RPM. I REPLACED THE CAM SENSOR ON R-F ENG AND R… read more
john
john
High School or GED
254 satisfied customers
2000 dodge dakota: 3.9 V..6 scanner..malfunction..lean..running rough
2000 dodge dakota 3.9 V-6 scanner shows possible iac malfunction and no fuel to right bank. no missfires in history but when i changed the plgs awhile back the right bank plugs were lean. no pending c… read more
joseph carrillo
joseph carrillo
automotive drivability tech
Vocational, Technical or Trade Scho
314 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,691 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,419 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,539 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x