How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 23111
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Dodge RAM 1500 4x4 where is the MAF/IAT SENSOR ON DODGE 1500

This answer was rated:

where is the MAF/IAT SENSOR ON DODGE 1500 RAM 5.9L GAS ENGINE 2002

Hello and welcome to JustAnswer!


Chrysler fuel systems are speed density and not mass airflow, so there isn't a MAF sensor on your truck. It does have an IAT sensor though.


On the top/front area of the intake you will find a metal sensor that screws directly into the top of the intake and has a two wire electrical connector. This is the IAT.

sprinkles08 and 3 other Dodge Specialists are ready to help you