How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mopar Certified Your Own Question
Mopar Certified
Mopar Certified, Dodge Technician
Category: Dodge
Satisfied Customers: 11332
Experience:  24 Year Chrysler/Dodge Certified Specialist
Type Your Dodge Question Here...
Mopar Certified is online now
A new question is answered every 9 seconds

Dodge Caravan codes p0733( gear 3 incorrect ratio), and p0700

This answer was rated:

codes p0733( gear 3 incorrect ratio), and p0700 xmsn control syst. malf) I Replaced xmsn solenoid pack...reset computer...still will not shift into top acts the same. what is the likely problem?
Welcome to Just Answer Dodge my name isXXXXX realize that all my answers are based solely on the info you provide me......

If those are the only 2 fault codes you have, then, unfortunately, you have an internal problem with third gear and the transmission needs to come apart and be repaired.
Customer: replied 6 years ago.
Not what I wanted to you want to buy a brand new solonoid pack? LOL
No other possibilities eh? 210000 miles.
If there were speed sensor codes.....or solenoid codes,,,,to go along with your 733, then I would say there are other possibilities HOWEVER, when that code comes by itself it only means bad news, unfortunately.
Mopar Certified and other Dodge Specialists are ready to help you