How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mopar Certified Your Own Question
Mopar Certified
Mopar Certified, Dodge Technician
Category: Dodge
Satisfied Customers: 11332
Experience:  24 Year Chrysler/Dodge Certified Specialist
Type Your Dodge Question Here...
Mopar Certified is online now
A new question is answered every 9 seconds

how to replace serpentine belt on 2007 Dodge Nitro SXT

Customer Question

how to replace serpentine belt on 2007 Dodge Nitro SXT
Submitted: 7 years ago.
Category: Dodge
Expert:  Mopar Certified replied 7 years ago.

Welcome to Just Answer Dodge my name isXXXXX realize that all my answers are based solely on the info you provide me....


Are you just needing a diagram showing the belt routing around the pulleys?

Customer: replied 7 years ago.
Yes. I have the belt, but I do not know how to put it back on properly....
Expert:  Mopar Certified replied 7 years ago.
When installing accessory drive belt onto pulleys, make sure that belt is properly routed and all V-grooves make proper contact with pulleys.
1.Rotate tensioner clockwise and position accessory drive belt over all pulleys.
2.Gently release tensioner.
3.Install combination coolant recovery/washer reservoir


Attachments are only available to registered users.

Register Here