How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mopar Certified Your Own Question
Mopar Certified
Mopar Certified, Dodge Technician
Category: Dodge
Satisfied Customers: 11332
Experience:  24 Year Chrysler/Dodge Certified Specialist
Type Your Dodge Question Here...
Mopar Certified is online now
A new question is answered every 9 seconds

2007 Dodge ram 1500 4x2: assembly..the hub nut

Resolved Question:

2007 Dodge ram 1500 4x2, i need to replace front wheel bearing assembly.What is the hub nut size, does it have a cotter pin if not can it be re-used?thanks.
Submitted: 7 years ago.
Category: Dodge
Expert:  Mopar Certified replied 7 years ago.

Welcome to Just Answer Dodge my name isXXXXX realize that all my answers are based solely on the info you provide me....


The 4x2 trucks do not have a drive axle on the front so there will not be a hub or axle nut. The hub/bearing will just be held in place by 3 bolts from the back side of the steering knuckle.

Mopar Certified and 3 other Dodge Specialists are ready to help you