Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Ask an Expert,
Get an Answer ASAP!

Related Dodge Questions
Engine stalls when it hits 2500 RPM. IF I hit the gas the
Engine stalls when it hits 2500 RPM. IF I hit the gas the tach will bounce back and forth between 2000-2500. I let off the accelerator, it backs off and I can push the gas until its hits 2500. Ive cha… read more
Robert Blackwell
Robert Blackwell
Shop Owner
Vocational, Technical or Trade School
138 satisfied customers
2001 dodge 1500 4x4 5.9 code p0206 noid lite flashes
2001 dodge 1500 4x4 5.9 code p0206 noid lite flashes injector replaced code still present … read more
Mechanic01
Mechanic01
4,796 satisfied customers
I put ten bucks fuel in it the other day and its ran like
i put ten bucks fuel in it the other day and its ran like shit ever since , im driving with two feet whenit is over 2500 rpmits fine but when it hits 1000 itdies … read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
30,334 satisfied customers
RAM 3500: Hey Chris. new question. engine this time so feel
Hey Chris. new question. engine this time so feel free to pass it on if you want. ram 3500 5.9 cummins code P2249 (i think) anyway bank 2 injector wiring. I have visibly inspected and "ohmed out" the … read more
Chris
Chris
Shop Foreman
7,095 satisfied customers
Have a 1999 Dodge 3/4 ton 4x4 with several aftermarket upgrades
Have a 1999 Dodge 3/4 ton 4x4 with several aftermarket upgrades to include Banks Power Pack, 4" Monster exhaust, turbo upgrade, autominder programmer, Air Dog Raptor fuel pump, exhaust brake w/ torque… read more
Pete
Pete
Automotive Diagnostic Specialist
General auto certifications
30,334 satisfied customers
Dodge RAM 2500 4x4: 2006 2500 diesel 5.9 Was driving down
2006 2500 diesel 5.9 Was driving down highway and truck just started running rough, also seems to be some kind of clacking noise? Normally the engine sounds just fine, Hard to describe the noise reall… read more
-Brad-
-Brad-
Foreman Dodge Dealership
Vocational, Technical or Trade Scho
8,227 satisfied customers
Ram 2500 4x4: My 2006 Ram 2500 w/ the 5.9 is getting close
My 2006 Ram 2500 w/ the 5.9 is getting close to the 100,000 mile mark. I'm thinking of adding a K&N intake but what else can I do to "open her up"?… read more
tripletauto
tripletauto
Shop Foreman
Associate Degree
238 satisfied customers
dodge: 5.9 is the way to go as there are major problems
i am going to switch to dodge cummins. i understand that the 5.9 is the way to go as there are major problems withthe newer 6.7. i will probably look in the 2006 to 2008 range. i also understand that … read more
Dodgerench
Dodgerench
ASE Certified Technician
Vocational, Technical or Trade Scho
2,822 satisfied customers
dodge ram 2500 4x4: diesel..pulling..reverse but stronger and it idles
i have 05 dodge ram 2500 4x4 5.9 diesel the truck has 167k mil when it come to a stop the truck wont to keep pulling foward and the same thing in reverse but stronger and it idles up, all the other fu… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,108 satisfied customers
98 Dodge Ram 1500 4x4: 5.9 liter engine..battery died..restarted..park
I have a 98 Dodge Ram 1500 4x4 5.9 liter engine the battery died. When I charged up the battery and restarted the truck the idle is running way to fast 2500 rmp in park. I did not have a fast idle pro… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
1,754 satisfied customers
Dodge: stall..no certain time or rpm or boost or egt it just dies
Tim Mohr?? I am still having the stall and die tro, w/ my 05 dodge 5.9 24 valve engine it starts ok but when under a load at no certain time or rpm or boost or egt it just dies and have to wait to res… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,363 satisfied customers
2005 DODGE RAM 2500: TON..DIESEL ENGINE..2 gauges FROM BANKS..SPARE
I OWN A 2005 DODGE RAM 2500 3/4 TON W/ A 5.9 N24 VALVE DIESEL ENGINE . I HAVE ADDED THE "BANKS 6 PACK OPTIONS, AND THEY HAVE BEEN WORKING FINE FOR OVER A YEAR . I ADDED 2 GAUGES FROM BANKS THE EGT & T… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,363 satisfied customers
3500 dodge: 4wd..mpg..power train being equipped..under load..torque
I05 3500 dodge diesel 4wd drw 4:10 rear 4speed auto. My problem is that it works(the ratio and 4speed} for loads, i've hauled 15000 lbs over the sierra summit numerous occasions, but running 2000 rpms… read more
Tom
Tom
Professor, Auto Technology
Bachelor's Degree
862 satisfied customers
2001 Dodge: I just changed the fuel filter and now it will not start
I have a 2001 Dodge 5.9 I just changed the fuel filter and now it will not start. What did I do wrong?… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,363 satisfied customers
2004 Dodge: 000 miles..check engine light keeps comming on..dealership
2004 Dodge cummins 2500 w 6-speed (66,000 miles). The check engine light keeps comming on. ive taken it to the dealership about 12 times in the last 8 months. It got hard to start about 7 months ago s… read more
Instructor jp
Instructor jp
technical instructor
Associate Degree
313 satisfied customers
I have a 1997 dodge intrepid with 3.5 L engine and A/C.
I have a 1997 dodge intrepid with 3.5 L engine and A/C. Check engine light comes on after exiting highway (60 mph) and stopping at traffic light. After a few local trips the light goes out until my ne… read more
Brian W
Brian W
Master Auto Technician
Vocational, Technical or Trade Scho
358 satisfied customers
2007 Dodge: w/cummins..code p2149 active, Engine runs ruff and loss
Have a 2007 Dodge 2500 w/Cummins, apx 42000 miles. Code P2149 active, Engine runs ruff and loss of power. Had a friend pull the code, any troubleshooting advise or suggestion. Does the ECM send the vo… read more
garrtim
garrtim
SERVICE MANAGER
2,266 satisfied customers
ram 2500: 4x4..check enigne light stays..changed both sensors (oxyen
i have a dodge 1998 4x4 ram 2500 5.9 light enigne and the check enigne light stays on i have changed both sensors (oxyen) this truck has two it still say that sensor 2 is to high… read more
RIP
RIP
Lead Technician
Vocational, Technical or Trade School
469 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,095 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,073 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,822 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,363 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Don - Mo Lurch

Don - Mo Lurch

Aftermarket & Factory Electronics

1,593 satisfied customers

Cert. Dodge & Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x