How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Hardy Your Own Question
Matt Hardy
Matt Hardy, ASE Certified Technician
Category: Dodge
Satisfied Customers: 920
Experience:  ASE Master Auto Tech, ASE L1, Jeep/Chrysler Dealer Tech, 18 yrs exp
Type Your Dodge Question Here...
Matt Hardy is online now
A new question is answered every 9 seconds

2010 dodge ram right turn signal and brake light does

Customer Question

2010 dodge ram right turn signal and brake light does not work.running light does work.cannot find. fusechecked all fuses in panel none blown
Submitted: 7 years ago.
Category: Dodge
Expert:  Matt Hardy replied 7 years ago.

Hello and welcome to Just Answer, my name is Matt.

There are NO fuses for this circuit.

The circuit is controlled by the TIPM (the black fusebox underhood).

We have had some problems with these TIPMs, so it is definitely a suspect.

Do you have any aftermarket add ons, like extra lights or trailer wiring?

How many miles on your truck?

Customer: replied 7 years ago.
no aftermarket. 700 miles on truck
Expert:  Matt Hardy replied 7 years ago.

Are you able to get to your local dealership?


Customer: replied 7 years ago.
iss this somethuing i can do myself or is it expensive
Expert:  Matt Hardy replied 7 years ago.

It depends how much electrical experience you have.

Your truck is in warranty, so if you can get it to the dealer, the repair will be free.


In a case like this, I would locate the circuit on the bottom of the TIPM, power it up with my power-probe, and see if the bulb illuminates.

If it does, then the TIPM is faulty.

If not, then the circuit is open, which must be traced step-by-step.