How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask TIM Your Own Question
Category: Dodge
Satisfied Customers: 6277
Type Your Dodge Question Here...
TIM is online now
A new question is answered every 9 seconds

2 connectors that connect to the top of the fuel pump that is..tank

Resolved Question:

I need to know how to remove 2 connectors that connect to the top of the fuel pump that is in the tank.

I took a picture.
Submitted: 7 years ago.
Category: Dodge
Expert:  TIM replied 7 years ago.
hello- these are the fuel line connectors?tim
Customer: replied 7 years ago.
Yes I think they both are but they are not the type you can take off with a fuel disconnect tool they look more like electrical connectors.

One line goes to the fuel pump itself and one goes to a big round thing also in the tank
Customer: replied 7 years ago.
Here is a picture of it, connected to the big silver thing - it has blue tabs.
Expert:  TIM replied 7 years ago.
push the fuel line towards the connector and squeeze release tabs then pull line off -- make sure alll dirt is cleaned away from the release tabs or it will not compress enough to release,tim
Customer: replied 7 years ago.
Were you able to see the picture to make sure thats the right kind?

The vehicle is at our shop and I've tried everything I can think of and just wanted to make sure you are 100% that is the way to remove them before I head back over there.
Expert:  TIM replied 7 years ago.
pic did not come through,tim-- but i double checked service manual,tim
Customer: replied 7 years ago.

sorry I forgot to include it
Expert:  TIM replied 7 years ago.

yes -- the info is correct,tim


push it in and then press release tabs

TIM and 2 other Dodge Specialists are ready to help you