How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 23004
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
9825021
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

2008 town and country How do I compress the caliper on the

Resolved Question:

2008 town and country: How do I compress the caliper on the rear brakes. The front compressed very smoothly, but thw back does not budge.
Submitted: 7 years ago.
Category: Dodge
Expert:  sprinkles08 replied 7 years ago.

Hello and welcome to JustAnswer!

 

The caliper pistons need to be turned as they go in, but they also need to have pressure put on them. There is a special tool needed to push these pistons back in. Here is a diagram of the setup. It's Miller special tool 8807-1 and 8807-2.

 

graphic

sprinkles08 and other Dodge Specialists are ready to help you