How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 22985
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

following bolts on a 2009 1500 4x4 ram..front

Resolved Question:

hi i need torque specs for the following bolts on a 2009 1500 4x4 ram. front end- lower control arm bolts,lower strut bolt,upper strut bolts and the upper stablizer pin bolt. if you get those to me that would be great. thank you! bob
Submitted: 7 years ago.
Category: Dodge
Expert:  sprinkles08 replied 7 years ago.

Hello and welcome to JustAnswer!


The lower control arm pivot bolt/nuts are 150 ft lbs.

The strut to control arm bolt/nut is 155 ft lbs.

The sway bar link nut is 75 ft lbs.

The upper strut mounting nuts are 43.5 ft lbs.

sprinkles08 and other Dodge Specialists are ready to help you