Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Dakota: Need to drop rack and pinion on Dodge Dakota to drill
Need to drop rack and pinion on Dodge Dakota to drill out bottom bolt on steering connector. Does the rack and pinion need to come all the way out? Would it be easier to replace boots and inner tie ro… read more
MoparHeat
MoparHeat
Automotive Technician
ASE Automotive Technician
988 satisfied customers
Dodge intrepid: I have a 2002 dodge intrepid, can you give
I have a 2002 dodge intrepid, can you give me a breakdown of the steering system. I went to get an alignment and was told my inner bushings were bad. I found ones that attached to the rack and pinion,… read more
Expert
Expert
4,444 satisfied customers
Interpid: I have a nock in the front streeing of a Intrepid
I have a nock in the front streeing of a Intrepid but it is not the tie rods what could it be?… read more
Mike S.
Mike S.
Vocational, Technical or Trade Scho
9,283 satisfied customers
Steering..the tie rods on the rack and pinion had broken..drove
had my tie rod bushings replaced and left the shop and my steering was real tight and then it locked up on me so i took it back to the same shop and they said it was caused from the center pick up for… read more
mastertech29
mastertech29
180 satisfied customers
2002 Dodge Intrepid: parking lot..On examining the steering rods.
My daughter's 2002 Dodge Intrepid lost all steering last night. Fortunately it happened in a parking lot. On examining the steering rods. two bolts had been sheared off, with a portion of each remaini… read more
a dodgetech
a dodgetech
Lead Tech
High School or GED
622 satisfied customers
dodge intrepid: no bushings..rack..pinion..play in the steering wheel
I have a dodge intrepid 2004 2.7 engine the inner tie rod looks to have no bushings on the right side and can be moved forward a backward causing it to be unstable. Could this be the cause for the vib… read more
a dodgetech
a dodgetech
Lead Tech
High School or GED
622 satisfied customers
1998 dodge intrepid: My steering wheel moves..rack..pinion..tie rod
Hello, I have a 1998 dodge intrepid, 3.2l motor. My steering wheel moves back and forth about 1 inch, with no movement at the tie rods leaving the rack and pinion steering unit. The inner tie rod bush… read more
Mike V.
Mike V.
technician
Subaru and Nissan factory training.
33,997 satisfied customers
1994 dodge intrepid: 000 miles..front end..low speeds..steering wheel
1994 dodge intrepid with 85,000 miles. The front end shakes while going straight at low speeds, but only sporadically. It will stop as soon as you turn the steering wheel a little bit. Front end was c… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
1996 Dodge Intrepid: I replaced the power steering pump
On a 1996 Dodge Intrepid, the power steering has stopped working. I replaced the power steering pump. It still is not working. How can I confirm if the problem is the steering gear or the rack and pin… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
Dodge caravan se: turn left..front end..I just had the strut bearings
I have a dodge caravan se 2002, when I turn left or right the front end makes a terrible rubbing noise, I just had the strut bearings replaced and the noise continues. Any suggestions?… read more
Eric
Eric
49,767 satisfied customers
Dodge Intrepid SE: 2.7L..no steering: steering wheel and front wheels
Dodge Intrepid SE, 2.7L, 2003. There is no steering: steering wheel and front wheels are independent.… read more
DODGEEXPERT
DODGEEXPERT
SERVICE MANAGER
Associate Degree
546 satisfied customers
1984 Dodge Intrepid: new tires put..steering..stick..sporadically
After having new tires put on my 1984 Dodge Intrepid the steering seems to stick briefly while turning. Have had two different mechanics look at it and both have assured me that nothing is wrong but i… read more
Randall C
Randall C
Auto Technician / Consultant
Vocational, Technical or Trade Scho
14,629 satisfied customers
2000 dodge intrepid: rack and pinion..2.7L..severe clunk on turns
just replaced bad stabilizer links and rack and pinion on a 2000 dodge intrepid 2.7L still have a severe clunk on turns over bumps, feels like its right under your feet but nothing noticable do you ha… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,228 satisfied customers
97 dodge intrepid: clucking noise when i turn the car..liter
I have a clucking noise when i turn the car to the right or left what could it be 97 dodge intrepid 3.5 liter… read more
dodge bum
dodge bum
Master Mopar Technition
Vocational, Technical or Trade Scho
298 satisfied customers
1998 Dodge Intrepid: the play of the steering gear box
I would like to know how to check the play of the steering gear box in my 1998 Dodge Intrepid, 3.2. ? Can you also tell me where the gear adjuster is located?… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,946 satisfied customers
97 dodge intrepid: my rack and pinion..bolts..cranked..steering wheel
I just took out my rack and pinion in my 97 dodge intrepid 3.3L to replace the inner tie rod end bolts that had broken off in it. I just got through reinstalling everything, I cranked it up, and start… read more
lucasg573
lucasg573
Dodge, Chrysler, and Jeep Technician
Vocational, Technical or Trade Scho
38 satisfied customers
1996 chrysler concorde: rack and pinion..firewall (2..side) are worn
I have a 1996 chrylsler concorde. The rack and pinion is fine but the bushings up by the firewall (2 on each side) are worn. We found the bushings to replace and proceeded to do so. The bushing is a m… read more
Roy Colquitt
Roy Colquitt
Meter Specialist I
Associate Degree
296 satisfied customers
Jerking..i checked the rotor on the driver side..wheel bearing
When i get slowed down to 3-4 miles per hour til i stop there is a jerking motion and i have checked the rotors and they are alright. When i checked the rotor on the driver side the rotor and everythi… read more
Brad
Brad
Lead Diagnostic Technician
Vocational, Technical or Trade Scho
2,361 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

8,677 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

7,328 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Chris (aka-Moose)

Chris (aka-Moose)

Technician

2,513 satisfied customers

24 years of experience diagnosing & repairing

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,479 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x