Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
Dakota: I have a 2007 dodge Dakota that just had the engine
I have a 2007 dodge Dakota that just had the engine block replaced. Popping a P2074 code. It's very difficult to start and to keep it running you have to be on the gas pedal. It's not getting enough a… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,266 satisfied customers
ram 2500: with a 5.9 gas engine..200k miles. it started to miss bad.
i have a dodge1999 ram 2500 with a 5.9 gas engine. it has 200k miles. it started to miss bad. i checked plug wires dist cap injectors. when i checked the plugs i found #4 with the electrode burned awa… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1995 dodge intrepid: valve gasket covers..v-6, 3.5 litre.
How do you change the valve gasket covers on a 1995 dodge intrepid? It's a v-6, 3.5 litre.… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
1999 dodge: 5.2l..exaust..detonation during acceleration under load
hi,i have a problem in my 1999 dodge ram van 5.2l. poor performance in acceleration,engine/exaust noise like detonation during acceleration under load. is not a fuel supply problem.( i ve the same pro… read more
moparfl
moparfl
ASE Certified Technician
Vocational, Technical or Trade Scho
3,292 satisfied customers
2002 dodge durango: the engine surging..instrument..pannel
hello, I have a 2002 dodge durango. I am having problems with the engine surging. There is a engine symbol light appearing on the instrument pannel. The engine surges up to 2000 rpm upon start-up whet… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2000 dodge intrepid: all 8 bolts, sensors, and hoses..throttle body
How do you remove the intake manifold from a 2000 dodge intrepid? I removed all 8 bolts, sensors, and hoses, but seems like there is something holding it on near the throttle body. Any Suggestions?… read more
Mr. T
Mr. T
Mechanic
Vocational, Technical or Trade Scho
452 satisfied customers
2001 Dodge Intrepid: the upper intake manifold..coolant..diagram
How do you remove the upper intake manifold from a 2001 Dodge Intrepid 2.7L in order to replace the coolant air bleeder? Need a step by step or diagram please.… read more
Eric
Eric
Retired
N/A
34,590 satisfied customers
A 1999dodgeram 1500 5.9.code po420..haynes..catalyst system..bank one
i have a 1999dodgeram 1500 5.9.code po420 has come up.need to know what this is.the haynes repiar manual sayes catalyst system efficiecy below threshold(cylinder bank one).what do i go after to repiar… read more
Chris
Chris
Shop Foreman
7,364 satisfied customers
95 Dakota SLT: V8..it warms up good surges 2-300 rpm..egr valve
I have a 95 Dakota SLT Magnum V8 that after it warms up good surges 2-300 rpm have replaced o2 sensors ,tps,crank sensorand idle sensor with no luck. Manual says it has egr valve but it does'nt can yo… read more
Mike Kellam
Mike Kellam
Owner/Entrepreneur
Vocational, Technical or Trade Scho
106 satisfied customers
1998 dodge: compression..cap..rotor..tps, idle control, coil
I have a 1998 dodge ram 318 has been losing power. I have 120-150 pounds of compression in every cylinder. replaced cap, rotor, wires, both 02 sensors, map sensor, tps, idle control, coil, intake gask… read more
Gordon
Gordon
Associate Degree
30 satisfied customers
94 dodge b250: intake..cked ect, iac, tps, o2, map, crank sensor
got a 94 dodge b250 5.2 runs good cold for about 5 mins... then runs terrible backfires thru exhuast and intake will not take gas. cked ect, iac, tps, O2, map, crank sensor, and dist.. any help will b… read more
sprinkles08
sprinkles08
Technician
High School or GED
18,266 satisfied customers
steps in removing fuel injectors and replaceing o-rings on
steps in removing fuel injectors and replaceing o-rings on a 1997 dodge caravan 3.3 thank you tom… read more
Eric
Eric
Retired
N/A
34,590 satisfied customers
1996 dodge ram 2500: V10..1500 rpm..the map sensor..idle speed
my 1996 dodge ram 2500 V10 idles at 1200 to 1500 rpm about 25% of the time , the map sensor and idle speed control motor have been replaced, I also have a new battery. Any ideas… read more
Dodgerench
Dodgerench
ASE Certified Technician
Vocational, Technical or Trade Scho
2,823 satisfied customers
2004 Chrysler Concorde: I am getting code..3.5L..camshaft..wiring
I am getting code P0344 on my 2004 Chrysler Concorde, 3.5L engine. It looks like I need to check the camshaft wiring and sensor connections for starters. Any ideas where I will find this gizmo?… read more
Jerry
Jerry
Master Mechanic
Vocational, Technical or Trade Scho
1,754 satisfied customers
I have a 1997 dodge intrepid with 3.5 L engine and A/C.
I have a 1997 dodge intrepid with 3.5 L engine and A/C. Check engine light comes on after exiting highway (60 mph) and stopping at traffic light. After a few local trips the light goes out until my ne… read more
Brian W
Brian W
Master Auto Technician
Vocational, Technical or Trade Scho
358 satisfied customers
1996 ram 1500: P0133 O2 Sensor Circuit Slow Response (Bank 1 Sensor 1
P0133 O2 Sensor Circuit Slow Response (Bank 1 Sensor 1) This is the code I am getting. should I change the sensor and where is it located on a 1996 ram 1500… read more
garrtim
garrtim
SERVICE MANAGER
2,268 satisfied customers
Which wires are for the ait sensor and which is for the o2 sensor
where is it located at and which wires are for the ait sensor and which is for the o2 sensor… read more
vipertech763
vipertech763
Vocational, Technical or Trade Scho
1,854 satisfied customers
1997 dodge dakota: trucks..check engine light..loss of cam or crank
my 1997 dodge dakota trucks check engine light is on and it reads loss of cam or crank and is burning oil what is wrong and about how much to fix… read more
autodoc_2000
autodoc_2000
Automotive Technician/Asst Service Manag
Vocational, Technical or Trade Scho
2,556 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,364 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

11,701 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,823 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,383 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,648 satisfied customers

16 years of experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x