How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, Dodge Technician
Category: Dodge
Satisfied Customers: 4141
Experience:  Over 24 years of experience as lead tech and shop foreman.
Type Your Dodge Question Here...
Richard is online now
A new question is answered every 9 seconds

water pump installation Dodge Ram 2500 2005 diesel

Resolved Question:

water pump installation Dodge Ram 2500 2005 diesel
Submitted: 7 years ago.
Category: Dodge
Expert:  Richard replied 7 years ago.

Hello there!

Are you looking for instructions on how to replace the water pump? Thanks

Customer: replied 7 years ago.
Expert:  Richard replied 7 years ago.

Here is the removal procedure

-Disconnect battery negative cables.

-Drain cooling system

-Disconnect ambient air temp sensor electrical connector and mass airflow sensor electrical connector (if equipped).

-Remove turbocharger inlet tube and air filter housing.

-Remove generator assembly

-Remove the accessory drive belt

Remove water pump mounting bolts and remove pump.

When you install the new pump install new O-ring seal in groove on water pump
Install water pump with the weep hole facing downward. Tighten mounting bolts to 18 foot lbs torque and install all the other parts.

This job is actually very simple and if you have anymore questions feel free! Thanks, Richard

Richard and 2 other Dodge Specialists are ready to help you