How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask DODGEEXPERT Your Own Question
DODGEEXPERT, Dodge Technician
Category: Dodge
Satisfied Customers: 546
Type Your Dodge Question Here...
DODGEEXPERT is online now
A new question is answered every 9 seconds

How do you remove the fan clutch on a 2008 5.7 L Hemi Procedure

Resolved Question:

How do you remove the fan clutch on a 2008 5.7 L Hemi ? Procedure and tools required ?
Submitted: 8 years ago.
Category: Dodge
Expert:  DODGEEXPERT replied 8 years ago.
Hello and thanks for your post. Well the procedure for removing the fan clutch is first you leave your fan belt on this will provide a surface of resistance so when you use your wrench the waterpump wont allow too much slippage. Second you will need a fan clutch wrench or an air hammer to remove the clutch whatever tool you decide to use you will need to be directly in front of the truck and it comes off counter clockwise. Once off the water pump you simply loosen the four bolts and remove from fan blade and install new clutch. The threads are right hand on the waterpump.
DODGEEXPERT and 4 other Dodge Specialists are ready to help you