How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask TIM Your Own Question
Category: Dodge
Satisfied Customers: 6277
Type Your Dodge Question Here...
TIM is online now
A new question is answered every 9 seconds

How do I remove the dash in a 1999 Dodge Ram to replace the radio?

This answer was rated:

How do I remove the dash in a 1999 Dodge Ram to replace the radio?
Disconnect and isolate the battery negative cable.
Turn the ignition switch to the Unlock position, set the parking brake, and place the automatic transmission gear selector lever in the Low position.
If the vehicle is so equipped, set the tilt steering column in its lowest position.
Using a trim stick or another suitable wide flat-bladed tool, gently pry around the perimeter of the cluster bezel to disengage the snap clips from their receptacles in the instrument panel
Pull the outboard side of the cluster bezel away from the instrument panel far enough to clear the trip odometer reset button.
Remove the cluster bezel from the instrument panel.
TIM and 5 other Dodge Specialists are ready to help you

Related Dodge Questions