How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Dodge
Satisfied Customers: 13561
Experience:  Dodge/Cummins and Chrysler Certified Master Tech
12365498
Type Your Dodge Question Here...
Chris is online now
A new question is answered every 9 seconds

2008 Dodge Avenger: serpentine belt..a 2.4L engine in an SXT model car

Resolved Question:

I need to know the correct routing for the serpentine belt for a 2008 Dodge Avenger with a 2.4L engine in an SXT model car?
Submitted: 8 years ago.
Category: Dodge
Expert:  Chris replied 8 years ago.

hi and welcome to Just Answer Dodge. Here is the info for you.

 

Chris

 

2.0/2.4L




NOTE: When installing drive belt on the pulleys, make sure that belt is properly routed and all V-grooves make proper contact with pulley grooves.
1.Install the accessory drive belt (2) around all the pulleys except for the generator pulley (3).
2.Using a wrench, rotate accessory drive belt tensioner (8) counterclockwise until accessory drive belt (2) can be installed on the generator pulley (3). Release spring tension onto accessory drive belt (2).

Chris and other Dodge Specialists are ready to help you