How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, Chrysler/Dodge/Jeep master tech
Category: Dodge
Satisfied Customers: 22801
Experience:  ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans and Hybrid Specialist
Type Your Dodge Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Have codes po351 po352d and po353 i get nothing futher as to what they

Resolved Question:

have codes po351 po352d and po353 i get nothing futher as to what they mean have you got a answer as to there meaning
Submitted: 8 years ago.
Category: Dodge
Expert:  sprinkles08 replied 8 years ago.
HiCustomer Thank you for asking your question on Just Answer. The other Experts and I are working on your answer. By the way, it would help us to know:
-What year is your Dodge?
-What model is your Dodge?
-How many miles are on your Dodge?
-What type of engine is in your Dodge?
-What have you already tried?

Thank you again for trusting us with your problem. Please reply as soon as possible so that we can finish answering your question.
Customer: replied 8 years ago.
2002 chrysler voyager with 3.3 liter moter 97000 miles flex fuel motor tryed nothing can not find what they ymean to hunt down unknown codes is a excerise in futility
Expert:  sprinkles08 replied 8 years ago.
Ok. The p0351 is ignition coil number 1 primary circuit, 352 is coil number 2, 0353 is coil number 3. You may have a problem with the coil pack or the wiring to it, or a bad engine controller. If the engine was cranked with the coil connector unplugged it would set these codes all together. You may have a bad coil pack, the coil may be losing its asd voltage feed, or all three of the coil driver wires may have a rub through somewhere in the harness. Your most likely culprit would be a coil pack.
sprinkles08 and 7 other Dodge Specialists are ready to help you
Customer: replied 8 years ago.
replaced coil pack less then 3 monts ago with oem parts is it possible for coil to go bad in that short of a period
Expert:  sprinkles08 replied 8 years ago.

It could happen but would be unlikely.

Can you give me a description of the problem you were having when you replaced the coil before?


Where you getting the same codes, a no start, another problem?


Did you clear the codes after you replaced the coil?


Have you had the coil unplugged?


Are you having any problems now other than the codes setting?


Customer: replied 8 years ago.
replaced cam sensor and crank sensor 4weeks ago yes all codes cleared after coil replacement code then was reading a bad coil unit so was replaced no other problems till sensors errors came up and replaced both as it didnt tell which one was bad no coil has not been unplugged no other problems are appearent at this time car has reset codes on its own without clearing it is real strange should i go to crysler garage
Expert:  sprinkles08 replied 8 years ago.
We may be able to fix this without a trip to the dealer. Do you remember what codes were set that led to the replacement of the coil?