How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott Your Own Question
Scott, Driveability expert
Category: Dodge
Satisfied Customers: 1190
Experience:  Dodge,Chrysler,Jeep Master Tech since 92.ASE Master since 1990.Currently Dealer employed.
Type Your Dodge Question Here...
Scott is online now
A new question is answered every 9 seconds

2005 ram 2500: a 5.7 hemi and am getting a crankshaft sensor code

Resolved Question:

i have a 5.7 hemi and am getting a crankshaft sensor code where is it and is it easily replaced? 2005 ram 2500.
Submitted: 9 years ago.
Category: Dodge
Expert:  Scott replied 9 years ago.

Hi, the crank sensor is easy to replace , its located on the passenger side of the lower engine block , just ahead of the transmission bell housing. some times you can see it by looking through the passengers side wheel well. One 10mm bolt holds it in. If its rusted in place and will not turn , spray some rust penetrant on the outside. . graphic

If you need more info, please reply, Scott


Scott and 7 other Dodge Specialists are ready to help you