How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask wheeler_05_99 Your Own Question
wheeler_05_99, Master Technician
Category: Dodge
Satisfied Customers: 46
Experience:  ASE Master Technician, Chrysler Electircal Specialist
Type Your Dodge Question Here...
wheeler_05_99 is online now
A new question is answered every 9 seconds

how to install a crankshaft sensor in a 1997 dodge neon

Resolved Question:

No Comment Added
Submitted: 9 years ago.
Category: Dodge
Expert:  wheeler_05_99 replied 9 years ago.


if you could tell me which engine size is in it i can glady give you instuctions on how to do it.

Customer: replied 9 years ago.
2 liter
Expert:  wheeler_05_99 replied 9 years ago.

The crankshaft position sensor mounts to the engine block behind the generator, just above the oil filter


  1. Disconnect electrical connector from crankshaft position sensor.
  2. Remove sensor mounting screw. Remove sensor.


Reverse procedure for installation.


wheeler_05_99 and 2 other Dodge Specialists are ready to help you
Expert:  wheeler_05_99 replied 9 years ago.
Please don't forget the ACCEPT button!!