How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask vipertech763 Your Own Question
vipertech763
vipertech763, automotive technician
Category: Dodge
Satisfied Customers: 1854
Experience:  gold certified, dodge viper certified
3256298
Type Your Dodge Question Here...
vipertech763 is online now
A new question is answered every 9 seconds

How to replace the starter on an 06' Dodge Charger?

3.5L

  1. Disconnect negative battery cable
  2. Install steering wheel holder locking steering wheel in straight-ahead position.
  3. Raise vehicle and support.
  4. Remove the underbody splash shield. 
  5. Starter assembly.

  6. Remove the intermediate steering shaft center bolt.

  7. Bolt removed.

  8. Separate the intermediate steering shaft upper and lower shaft.

  9. Disconnect the electrical connection from the starter.

  10. Remove the 3 starter mounting bolts and wiring clip.

  11. Pull starter forward and down.

  12. Work starter up and around exhaust.

  13. Work starter past the intermediate steering shaft.

  14. Remove starter from vehicle.

Let me know if you need more help or have more questions..

Read full interaction below »

Question

What are the steps to replace the started on an 06’ Dodge Charger with a 3.5 V6 engine?

Submitted: 10 years ago.
Category: Dodge
Expert:  vipertech763 replied 10 years ago.

3.5L

  1. Disconnect negative battery cable
  2. Install steering wheel holder locking steering wheel in straight-ahead position.
  3. Raise vehicle and support.
  4. Remove the underbody splash shield.
  5. Starter assembly.

  6. Remove the intermediate steering shaft center bolt.

  7. Bolt removed.

  8. Separate the intermediate steering shaft upper and lower shaft.

  9. Disconnect the electrical connection from the starter.

  10. Remove the 3 starter mounting bolts and wiring clip.

  11. Pull starter forward and down.

  12. Work starter up and around exhaust.

  13. Work starter past the intermediate steering shaft.

  14. Remove starter from vehicle.

Let me know if you need more help or have more questions..