Dodge

Dodge Repair Questions? Ask a Mechanic for Answers ASAP

Connect one-on-one with {0} who will answer your question

Related Dodge Questions
I have a 2003 Dodge Dakota. 4.7L, 105,000 miles. When
I have a 2003 Dodge Dakota. 4.7L, 105,000 miles. When starting cold, it makes a clacking sound that's quite loud...SEEMS to sound louder on passenger side, lower part of engine. It used to disappear a… read more
kalamykid
kalamykid
Pactor automotive
Vocational, Technical or Trade Scho
6,032 satisfied customers
Labor time to change clutch, pressure plate, throw out
labor time to change clutch, pressure plate, throw out bearing, slave cylinder, park brake release handle, clutch master cylinder, and fly wheel on a 2006 dodge dakota st club cab 2wd 3.7L v6 SOHC 12v… read more
George H.
George H.
Technician
Associate Degree
19,160 satisfied customers
intrepid es: I have a dodge intrepid 2.7l. The original problem
I have a dodge intrepid 2.7l. The original problem was head gasket blown. I had heads repaired and put them on using a procedure book out of chrysler manual. I thought maybe my chain were out but they… read more
Tim Mohr
Tim Mohr
ASE MASTER TECH
Master's Degree
2,434 satisfied customers
DODGE: rear drive shaft off and drove..noticeable..chain..unit to swap
this question is for DODGE EXPERT - - I did take the rear drive shaft off and drove with only the front drive shaft as you suggested. There seemed to be some difference in the noise but it was still n… read more
Dodge expert
Dodge expert
ASE MASTER TECH, REPAIR FACILITY OWNER
High School or GED
3,636 satisfied customers
dodge: flywheel area..really loud in park and nutral..reverse..reving
dodge 2500 cummins. is making a noise from what sounds like the flywheel area it is really loud in park and nutral. gets quiter in reverse after reving engine. makes the noise in drive when you are on… read more
Mopar Certified
Mopar Certified
Dodge Technician
Vocational, Technical or Trade Scho
6,295 satisfied customers
We changing the rack and pinion on my 98 Dodge Dakota and we
We changing the rack and pinion on my 98 Dodge Dakota and we can not get the steering shaft to slide up in order to reconect it what should I do??… read more
carguyjosh
carguyjosh
Associate Degree
2,164 satisfied customers
1998 Dodge Caravan le: van..removing..fly wheel..timing
I replaced a transmission, torque converter in a 1998 Dodge Caravan lE 3.3 L engine. The problem now the van will not start and I for got to mark the place of the old torque converter after removing i… read more
Stonyman
Stonyman
automotive technician
High School or GED
723 satisfied customers
1993 Dodge Dakota: step instructions..bearing..assembly..shop manual
Need step-by-step instructions for removal of center bearing support assembly for a 1993 Dodge Dakota. The shop manual is not very illustrative on this for some reason.… read more
Richard
Richard
Shop foreman/Lead technician
Vocational, Technical or Trade Scho
4,140 satisfied customers
2001 Dodge dakota: head gaskets..timing chain due..steady..tensioner
2001 Dodge Dakota 4.7 v8.Replaced both head gaskets and cam chains but having a hard time re-installing timing chain due to no slack in the cam chains.Any secret to doing this? I know dodge makes a sp… read more
b5demon
b5demon
Automotive Technician
Vocational, Technical or Trade Scho
3,746 satisfied customers
2002 dodge: started cold..right timing chain noise..lifter...after
2002 dodge ram 4.7 when started cold makes rattleing noise bad for 5 seconds. then still has right timing chain noise and a little lifter noise on right side.after about 5 min. it is fine.… read more
jeepmopar76
jeepmopar76
Master tech
Vocational, Technical or Trade Sc
1,228 satisfied customers
bolt holes that are further apart and I need to know explination
I matched up the bolt holes that are further apart and I need to know explination of tone wheel?… read more
brownjeff
brownjeff
Associate Degree
13,873 satisfied customers
2001 Dodge Dakota: 4.7L..tranmission..tcm..speed sensors
I have a 2001 Dodge Dakota with a 4.7L and 45RFE transmission. At wide open throttle the tranmission will not upshift until I let off the throttle. The tcm has been reflashed and all the speed sensors… read more
Instructor jp
Instructor jp
technical instructor
Associate Degree
313 satisfied customers
2003 dodge durango: a 2000 dodge..swaped..wiring..backfiring
Hello I need help I just purchased a 2000 dodge durango with a bad 4.7 I also purchase a 2003 dodge durango with a 4.7 .I had the motor changed but now I try and start the newly swaped motor it will n… read more
sprinkles08
sprinkles08
Technician
High School or GED
19,106 satisfied customers
DAKOTA: V..REBUILT..NEW ENGINE..CAM SENSOR ON R-f eng AND R-R BY FLY
I HAVE A DAKOTA V-6 3.7 LTR THAT I REPLACED ENGINE IN. I PURCHESED A REBUILT ENG FOR A LIBERTY OR DAKOTA 2004 3.7 AND THE NEW ENGINE WON''T GO OVER 2200 RPM. I REPLACED THE CAM SENSOR ON R-F ENG AND R… read more
john
john
High School or GED
254 satisfied customers
99 Dodge Dakota: automatic..The transmission that is..horsepower..tork
I have a 99 Dodge Dakota RT 5.9 with an automatic. The transmission that is in it will not hold up to the horsepower and tork. I''m wanting to put a manual 5-speed in the truck the 5-spd come put of a… read more
RD
RD
Service manager/ Master mechanic
Vocational, Technical or Trade Scho
1,918 satisfied customers
2003 dodge dakota: cooling system..coolant hose..overheating..3.9L
cooling system was dry so i added coolant but it, does not seem to be flowing through the coolant hose, to the engine. but the truck does not seem to be overheating. it''s a 2003 dodge dakota 3.9L… read more
JHoop
JHoop
Owner,Technician
High School or GED
5,425 satisfied customers
I have a 98 ram 4*4 with a 5.2L in it now i want to upgrade to a 5.
i have a 98 ram 4*4 with a 5.2L in it now i want to upgrade to a 5.9L would there be to much work and to expensive and what would it intail me having to replace to swap engines… read more
RD
RD
Service manager/ Master mechanic
Vocational, Technical or Trade Scho
1,918 satisfied customers
1993 dodge dakota: v6..fire from the cap or coil i changed both cop
i have a 1993 doodge dakota v6 truck dose not get any fire from the cap or coil i changed both cop an coil.an still can't get it started ..could you help me ..thank you john atkins… read more
mrrowland1
mrrowland1
Co-Owner/Az Mobile Reflash and Diagnosti
Associate Degree
164 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I AM VERY GLAD THAT I TOOK A CHANCE ON YOUR PROBLEM SOLVING SKILLS. I WAS SUCCESSFUL IN REPLACING THE FUEL PUMP. MY TRUCK RUNS LIKE A CLOCK. IT RUNS LIKE THE DAY I BOUGHT IT. NO LUNGING FORWARD, THE TURBO REACTS THE SECOND I STOMP ON THE GAS, AND IT HAS A LOT MORE POWER AND EVEN SOUNDS BETTER TO ME. IT SAVED ABOUT $500.00 BY DOING THE WORK MYSELF. I GIVE YOU ALL THE CREDIT FOR YOUR DIAGNOSING THE PROBLEM, JUST FROM THE SYMPTONS I GAVE YOU OVER THE e MAIL. I WILL USE YOUR WEB SITE AGAIN AND REFER MY FRIENDS. THANKS SO MUCH FOR THE HELP.

TOM WHITTAKERUSA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

Rev. Jerry BaysingerHolts Summit, Mo

I recently asked a question about my 2005 dodge ram, and I just wanted to let my Expert know that he hit the nail squarely on the head with his answer. I wanted to thank him again.

GregPittsburgh, PA

Just a quick line to tell you how pleased I am to have my brakes working properly after all this time. Your answer was what I needed. I would certainly recommend you highly. God bless!

JerryHolts Summit, MO

I was skeptical at first but thought I'd give it a try. I was pleasantly surprised. Your site actually is a quality service that I would recommend to others in a heartbeat.

StanSayre, PA

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

< Previous | Next >

Meet the Experts:

Jerry

Jerry

Master Mechanic

1,754 satisfied customers

ASE Master tech, 30 years exp. troubleshooter, driveability tech

Chris

Chris

Shop Foreman

7,702 satisfied customers

Dodge/Cummins and Chrysler Certified Master Tech

Mopar Certified

Mopar Certified

Dodge Technician

6,295 satisfied customers

24 Year Chrysler/Dodge Certified Specialist

moparfl

moparfl

ASE Certified Technician

3,292 satisfied customers

ASE Master Tech Gold level Chrysler Status 30 years dealership exp

Dodgerench

Dodgerench

ASE Certified Technician

2,850 satisfied customers

30+ years Dodge/Chrysler exp., ASE Master with L1 certification. Driveability/ combustion specialist

Tim Mohr

Tim Mohr

ASE MASTER TECH

2,434 satisfied customers

30 YRS EXPERIENCE, FOREIGN AND DOMESTIC, GAS AND DEISEL

Chris (aka-Moose)

Chris (aka-Moose)

Technician

1,832 satisfied customers

16 years of experience

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x