How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Miller Your Own Question
John Miller
John Miller, ASE Certified Master Tech
Category: Dodge
Satisfied Customers: 199
Experience:  37 yrs of experience Host of call in radio show on auto care Talkradio 950 Houston TX
Type Your Dodge Question Here...
John Miller is online now
A new question is answered every 9 seconds

Re-torque specs for Intake manifold,Rocker Shafts, Cyl-Heads

Customer Question

just need Re-torque specs for Intake manifold,Rocker Shafts, Cyl-Heads
Submitted: 10 years ago.
Category: Dodge
Expert:  John Miller replied 10 years ago.

The rocker arms tighten to 195 in lbs

The intake to 105 in lbs using a criss-cross pattern starting in the center.

The head bolts are torque to yield and NOT reuseable. The new bolts tighten to 25 ft lbs on the first pass, 40 ft lbs on the second pass and then turn 90 degrees. You start with the center bolts and do a circle out from there taking each bolt one step at a time.