How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask mike the mechanic Your Own Question
mike the mechanic
mike the mechanic, master technician
Category: Dodge
Satisfied Customers: 132
Experience:  ase certified master technician, level 4 dodge technician. 31 years experiance
Type Your Dodge Question Here...
mike the mechanic is online now
A new question is answered every 9 seconds

cylinder head bolt torque specs 4.7 liter dodge ram 1500

Customer Question

cracked left hand side cylinder head need head bolt torque specs
Submitted: 11 years ago.
Category: Dodge
Expert:  mike the mechanic replied 11 years ago.


Thanks for the question. Heres your torque specs:

  • Step 1: Tighten bolts 1-10, 20 N·m (15 ft. lbs.).
  • Step 2: Tighten bolts 1-10, 47 N·m (35 ft. lbs.). Tighten bolts 11-14, 25 N·m (18 ft. lbs.).
  • Step 3: Tighten bolts 1-10, 90 degrees. Tighten bolts 11-14, 30 N·m (22 ft. lbs.).
  • NOTE: The cylinder head bolts are tightened using a torque plus angle procedure. The bolts must be examined BEFORE reuse. If the threads are necked down (2) the bolts should be replaced.

    Necking can be checked by holding a straight edge against the threads. If all the threads do not contact the scale, the bolt should be replaced.

    bolts 1-10 are the large bolts and 11-14 are the smaller bolts.

    If this helped you out please hit the accept reply button, if not please let me know.

    Thanks, Mike