Construction and Road Equipment
Construction and road equipment repair questions? Ask a mechanic ASAP
Connect one-on-one with {0} who will answer your question
Answered in 3 minutes by:
2/7/2022
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 15,834
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
VerifiedHi, My name is***** will be glad to help. We can follow up as needed on here, Give me some time to review your information and follow up with my responses. Professionals are not employees of the site but users of the site and help on here as time allows in between jobs, family,etc. Response time can vary depending on my work load each day but I will always respond back on my next available login. Feel free to respond back at anytime if for any reason we seem to get separated,for status, etc.
If you grab the PDF copy and send over the schematic, I will review it and offer my suggestions. I am not buying your manual or your schematic that is worth at least four times my reward for helping. It just doesn't make sense.
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 15,834
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
VerifiedDan and 87 other Construction and Road Equipment Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a mechanicLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Construction and Road Equipment Questions
On a 2007 cat skid steer 226b2, serial # MJH11231, while
On a 2007 cat skid steer 226b2, serial # MJH11231, while doing the stall pressure test for the hydrostatic piston pump, I have pressure guages on MB1 and MB2 pressure ports, I am getting only 1000 and… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
IVE GOT A 843 BOBCAT SKIDSTEER HYDROLICS RAPIDLY CREEP DOWN
Second Opinion] IVE GOT A 843 BOBCAT SKIDSTEER HYDROLICS RAPIDLY CREEP DOWN WHEN RAISED SEAMS TO DRIVE FINE SUSPECT A O RING POSSIBLY IN VALVE BODY JUST GUESSING COULD USE INFO PLEASE… read more
Eric Magoon
Field Mechanic
High School Diploma
24 satisfied customers
I have a bobcat 2012 s185 I can pick the front of the bobcat
I have a bobcat 2012 s185 I can pick the front of the bobcat up with the tilt and it will hold but if I fold the bobtach up and shut it off it will leak down all the way to the ground. I had both cyli… read more
Field Tech
Field service tech/mechanic
Bachelor of science diesel technology
163 satisfied customers
I have a Trojan/O&K L2500 loader. It has a hydraulic issue,
I have a Trojan/O&K L2500 loader. It has a hydraulic issue, possibly on the pilot side. … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
I have a 1850k case dozer teir1 to put dozer in float you
I have a 1850k case dozer teir1 to put dozer in float you have to wiggle control to the right tilt a little to engage gravity drop with detent it should just be a straight forward push … read more
Dan
Technician
Associate Degree
15,834 satisfied customers
My hydraulics on komatsu 146-5 backhoe are not working. I
my hydraulics on komatsu 146-5 backhoe are not working. I think it has to do with the ride control … read more
Dan
Technician
Associate Degree
15,834 satisfied customers
Tilt not working on D6H dozer; the twin tilt cylinders are
tilt not working on D6H dozer; the twin tilt cylinders are both in collapsed position. … read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
I have a cat 304cr mini excavator ser# cat00304pnad01794.
the machine is having trouble when you opperate both tracks or just the right track alone. if you use only the left there is no problem. if both are used it is slow and weak but when i opperate any other hyd at the same time the tracks work fine until i stop the other hyd function. it doesnt off track and the 2 speed works when other hyd functions are used. … read more
Dan
Technician
Associate Degree
15,834 satisfied customers
We have a D6H series 2 Dozer with Hydraulic blade lift
We have a D6H series 2 Dozer with Hydraulic blade lift problems. the tilt works, the ripper works, but blade will not lift. … read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
I have a lull 844c-42 that is stuck tilting the carrage to
I have a lull 844c-42 that is stuck tilting the carrage to the right. It seems like the left tilt piston always has pressure. I can start the engine and it runs for about 10 seconds before the hydraul… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
D8k ser. 77v3434 equipped with 183b ser.41v6949 hyd. system
d8k ser. 77v3434 equipped with 183b ser.41v6949 hyd. system with ripper. anytime ripper is raised and ripper control lever is returned to neutral position main pressure go's over relief @ 2000 psi. th… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
I have tried to answer but to no avail. I have a Cat D8H s/n
I have tried to answer Dan but to no avail. I have a Cat D8H s/n 46A 13622 with 183Hyd system S/N 27H1754.This Machine has been a scraper tractor for years and I am putting dozer on tractor. The Hydra… read more
Dan
Technician
Associate Degree
15,834 satisfied customers
HiI just got a CAT 6 way blade and saw your answer to
Hi I just got a CAT 6 way blade and saw your answer to another on this issue. I am using on an 853 Bobcat skid steer, and also need to identify pins in the wiring plug. I would like to wire to my left… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
I have a cat 257 the lift cylinder has no fine control I have
I have a cat 257 the lift cylinder has no fine control I have to pull or push back all the way and then release to slow. If I try to ease into it nothing happens until all the way open… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
D6T quick drop valve doesnt work all the time. Itll work at
D6T quick drop valve doesn't work all the time. Itll work at full throttle when cold but i have to play with it once the oil gets hot. When the oil is hot and the engine at idle it will not engage qui… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
I have a d155ax-3 ser #60113The blade tilt hose is blown(part
I have a d155ax-3 ser #60113 The blade tilt hose is blown(part #17a-61-13151) I see one end under the cover on the blade frame arm Where is the other end? How do I access it?… read more
Fieldtech59
418 satisfied customers
D5H 6 way hyd blade will not stay in position.... any pressure
D5H 6 way hyd blade will not stay in position.... any pressure on either corner and blade angles that way with little resistance.… read more
Dan
Technician
Associate Degree
15,834 satisfied customers
Hello again, I have a 287B skid steer. I dont appear to
Hello again, I have a 287B skid steer. I don't appear to be getting 12 V to operate the electrical valve on an attached 6-way dozer blade when I press the auxiliary button on the left joystick. Do you… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.
Dallas, TX
< Previous | Next >
Meet the Experts:
Curtis B.
Technician
2,524 satisfied customers
Technican turned service manager with multiple lines of equipment and rental units.
Wayne
Journeyman
1,478 satisfied customers
worked on many road graders, Bull dozers , skid steers, Rollers
Cat Man
Cat Engine Expert
578 satisfied customers
I am ASE Master Certified.
dieseldan55
Mechanic
300 satisfied customers
Road Mechanic for Volvo Construction Equipment.
Chris (aka- Moose)
Technician
97 satisfied customers
24 years of experience diagnosing & repairing
cumminsdr
Mechanic
70 satisfied customers
Cummins field tech
Steve
Mechanic
42 satisfied customers
Heavy Equipment Mechanic for 25 years
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
