Construction and Road Equipment
Construction and road equipment repair questions? Ask a mechanic ASAP
Connect one-on-one with {0} who will answer your question
Answered in 42 minutes by:
4/14/2021
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 15,594
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
VerifiedHi, My name is***** will be glad to help. We can follow up as needed on here. Professionals are not employees of the site but users of the site and help on here as time allows depending on their daily schedule. Sorry to hear you're having these troubles with this machine. Thoroughly inspect the wiring harness and connector pins coming from your ignition switch and within your ignition circuit going to your fuse panel for any type of corrosion or damage that would cause a short or open circuit.Further confirm this using an ohmmeter to verify whether or not there are any shorts or open circuits within your wiring harness. Use a voltage tester to test for power to your ignition switch and then out of your ignition switch in each switched position that will confirm whether or not there are any problems with the ignition switch. Swap your relays one at a time with a known good one for testing purposes if you do not have an actual relay tester. It is also possible that you may have a faulty relay or poor ground connection within the wiring harness. I hope you find this information helpful. Reply back with the results of these checks if any further help is needed. It is a pleasure to help anyway I can.
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 15,594
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
VerifiedDan and 87 other Construction and Road Equipment Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a mechanicLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Construction and Road Equipment Questions
I shut off my jcb 2011 4cx backhoe and tried to start it the
I shut off my jcb 2011 4cx backhoe and tried to start it the next day and nothing turn the key, no buzzer, no lights on the instrument panel and no sound anywhere? … read more
Dan
Technician
Associate Degree
15,594 satisfied customers
After turning the machine off on Friday, went to start on
After turning the machine off on Friday, went to start on Saturday and absolutely nothing happened, after turning the ignition key on I got no buzzer, no lights on the dash Nothing! I checked the batt… read more
timhm marsteller
86 satisfied customers
John deer 310sg park brake does disengage when you engage
John deer 310sg park brake does disengage when you engage the transmission the stop light and buzzer comes on but doesn't effect the movement of the machine … read more
Dan
Technician
Associate Degree
15,594 satisfied customers
JD 310 won't start, nho lights, new battery, new fuses,
JD 310 won't start, nho lights, new battery, new fuses, where is Fusible link. … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
Batteries fully charged but get nothing when I turn the key
batteries fully charged but get nothing when I turn the key (Cat 420 D backhoe) … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
I have a JD 310SG backhoe. Half the time when I start it up
I have a JD 310SG backhoe . Half the time when I start it up I have no action on backhoe controls or 4x4 switch. I need to turn it off and restart. Sometimes all is then good, but more and more of the… read more
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
622 satisfied customers
I have a John deere 310sg backhoe and the transmission
I have a John deere 310sg backhoe and the transmission dipstick tube is all bent outta shape! Have a new one to replace it but am curious if i will lose all transmission oil doing the job? … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
Have a J.D. 310SG engine won't start. Machine is 2002-2003.
Have a J.D. 310SG engine won't start. Machine is 2002-2003. Changed fuel filter and bled air from lines. Some air still mixed with fuel. Nearest dealer is 100+ miles away. Have all manuals for machine… read more
Wayne
Journeyman
Vocational, Technical or Trade Scho
1,478 satisfied customers
I have a 2003 310sg how i can calibrate the throttle sensor,
i have a 2003 310sg how i can calibrate the throttle sensor … read more
Dan
Technician
Associate Degree
15,594 satisfied customers
Am back... trying to get backhoe moved... the parking breaks
Hey I am back... trying to get backhoe moved... the parking breaks is lock cause I can't start it.... there are two screws next to the driveshaft going into the rear end... I was told if I turn the it… read more
Wayne
Journeyman
Vocational, Technical or Trade Scho
1,478 satisfied customers
I have a 310g backhoe that doesn't have power to the
I have a 310g backhoe that doesn't have power to the injector pump when the ignition key is turn on … read more
Dan
Technician
Associate Degree
15,594 satisfied customers
I have a 773 Bobcat that won't move. The bucket and boom
I have a 773 Bobcat that won't move. The bucket and boom both work as they should. Parking brake light flashes six times and then pauses. This repeats itself. The parking brake lever between the foot … read more
Fieldtech59
418 satisfied customers
2010 New Holland B95B TC. light will not stay on, on the
2010 New Holland B95B TC. Green light will not stay on, on the control switch for the backhoe control. This switch is the top switch on the right hand side pilot control tower. If I hold the switch in… read more
Dan
Technician
Associate Degree
15,594 satisfied customers
My 310SG won't start and I have a code on it F9C4. I don't
I don't have the serial number but the model is 310SG … read more
Dan
Technician
Associate Degree
15,594 satisfied customers
How do you clear the service codes on a Deere 310sg 2003
How do you clear the service codes on a John Deere 310sg 2003 backhoe … read more
Wayne
Journeyman
Vocational, Technical or Trade Scho
1,478 satisfied customers
I have a case 580 super l and the gauge panel wont light up
I have a case 580 super l and the gauge panel wont light up if i jump it, I can start it, backhoe will run but no gauges work and will not shift forwards or reverse I thought was bad battery wires cle… read more
Dan
Technician
Associate Degree
15,594 satisfied customers
I have a 2006 deere 310sg backhoe. the problem, turn on the
greetings sir. i have a 2006 john deere 310sg backhoe. the problem, turn on the backhoe hydraulic switch, nothing happens. checked fuses, all good, for a long time the hydraulics to operate the lift a… read more
Dan
Technician
Associate Degree
15,594 satisfied customers
I have a 555c Ford backhoe. I was using it yesterday and when
I have a 555c Ford backhoe. I was using it yesterday and when I went to backup it won't do anything. I check to see if the lever switch was getting any power but didn't have any. Is there a fuse or do… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.
Dallas, TX
< Previous | Next >
Meet the Experts:
Curtis B.
Technician
2,524 satisfied customers
Technican turned service manager with multiple lines of equipment and rental units.
Wayne
Journeyman
1,478 satisfied customers
worked on many road graders, Bull dozers , skid steers, Rollers
Cat Man
Cat Engine Expert
578 satisfied customers
I am ASE Master Certified.
dieseldan55
Mechanic
300 satisfied customers
Road Mechanic for Volvo Construction Equipment.
Chris (aka- Moose)
Technician
97 satisfied customers
24 years of experience diagnosing & repairing
cumminsdr
Mechanic
70 satisfied customers
Cummins field tech
Steve
Mechanic
42 satisfied customers
Heavy Equipment Mechanic for 25 years
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
