Construction and Road Equipment
Construction and road equipment repair questions? Ask a mechanic ASAP
Connect one-on-one with {0} who will answer your question
Answered in 6 hours by:
2/23/2021
VerifiedGood morning, my name is ***** ***** I'd like to help you today. I'm a user on here just like you, I come on to help when time allows. I'm sorry you are having trouble with your Case 60XT, and although I am not the one who answered the older question that you referred to, I'll do my best to help resolve your issue.
I have attached a breakdown of the control valve on your machine for you to reference. You mentioned that you removed the poppet valve to inspect the spring and it was ok. To be clear, you removed the poppet that is in the loader arm spool circuit correct? With the poppet out you should clean out the bore and seat with compressed air. If you can inspect the seat that would be beneficial. Secondly while you are working on the valve, remove the loader arm spool to inspect. Lastly, you'll want to test/inspect the piston seals inside the loader arm lift cylinders. I hope this helps with your issue. Please reach out for more information. Thanks for choosing Just Answer!
VerifiedTomcM28 and 87 other Construction and Road Equipment Specialists are ready to help you
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a mechanicLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Construction and Road Equipment Questions
On a 2007 cat skid steer 226b2, serial # MJH11231, while
On a 2007 cat skid steer 226b2, serial # MJH11231, while doing the stall pressure test for the hydrostatic piston pump, I have pressure guages on MB1 and MB2 pressure ports, I am getting only 1000 and… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
I have a LA1353 front end loader - will not lift. I have
I have a LA1353 front end loader - will not lift . I have checked fluid level- full . Will tilt ,and grapple has third function and it works. I thought was a bad seal in lift cylinder - had them repla… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
The joy stick for the bucket doesn't lift the bucket. It's a
Hi my name is***** joy stick for the bucket doesn't lift the bucket … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
I have a case 60xt. I noticed that you answered someone with
I have a case 60xt. I noticed that you answered someone with a similar problem that I have several years ago. When I move the joy stick to raise the bucket, the bucket will initially drop before it ra… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
950k FER 775 bucket will not lower it wants to hydraulic
950k FER 775 bucket will not lower it wants to hydraulic puts load on it no codes,no events etc with et both cylinders been off & inspected resealed valve pulled no broken springs ,changed resolver 2 … read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
Had My 2018 Mahrinda in for 100hr service. They put in 36
Kevin, Had My 2018 Mahrinda in for 100hr service. They put in 36 qts of low temp hyd oil and filter. also changed engine oil and filter. The bucket will roll up and stop when using the joy stick but w… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
I have a caterpillar 226 skid loader. I replace the joystick
I have a caterpillar 226 skid loader. I replace the joystick on the right with the switch for the attachments. when I put it back together the bucket lift with not work anymore. … read more
Keiphun Sowell
Owner Brothers Restoration/Troubleshoot
AutoDiesel Technology
3,305 satisfied customers
I have a Deere 4100 with the 410 loader. When attaching the
Good morning. I have a John Deere 4100 with the 410 loader. When attaching the loader yesterday I hooked up the lines to the tractor then started it to use joystick to install the loader the loader ju… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
I installed a new joystick on my massey ferguson. it worked
i installed a new joystick on my massey ferguson. it worked find for a couple of days. now the bucket won; … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
I have a case 60xt 2005. I am having problems with the lift
Hi. I have a case 60xt 2005. I am having problems with the lift arms. When I lift the arms it goes a little slowly but they do raise up. When I try to lower them I can't. I have to move the handle tha… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
Mr. Curtis good evening: we have a M9850b kubota with
Mr. Curtis good evening : we have a M9850b kubota with cab/fwd with a … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
On my Cat backhoe 420e when I use joystick and tilt bucket
On my Cat backhoe 420e when I use joystick and tilt bucket forward sometimes it tilts all the way forward and joy stick cannot stop it. Uncontrolled forward tilt is dangerous. No predicting when it ha… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
My name is ***** ***** im working on a 328d skid steer and
Customer: hi my name is ***** ***** im working on a 328d skid steer and the display screen says left joy stick not centered I can seem to find the problem. … read more
Daniel Wilson
Associate Degree
1,345 satisfied customers
I have a Case 60XT skidloader and the left hand lever I can
Hi I have a Case 60XT skidloader and the left hand lever I can move all directions except for to the left which should lift the bucket. It will not move that direction. The next time I try to use it, … read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
I have an old 938 g and all the sudden my bucket control will
I have an old 938 g and all the sudden my bucket control will not float and when I raise or lower the bucket more than a tiny bit, the bucket goes into auto raise or lower and I have to jerk the joy s… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
i have a cat 262c2 skid steer in my shop. when i start
hello i have a cat 262c2 skid steer in my shop. when i start the engine the bucket raises up and puts the hyd system in a bind. i can push the red handle behind the seat to release the hyd pressure. w… read more
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,336 satisfied customers
The Koyker loader control on my 25HP Kioto tractor seems to
The Koyker loader control on my 25HP Kioto tractor seems to have changed the way it operates. The loader still raises, lowers and the bucket drops and curls up however the actions have changed with re… read more
Curtis B.
Technician
Associate Degree
2,524 satisfied customers
i have a kobelco sk60 1998 -2002 always worked fine but now
i have a kobelco sk60 1998 -2002 always worked fine but now the bucket curlys real slow,no leaks ,no crushed or damaged lines,everthing else works as it should,joy stick seems to be ok.… read more
dieseldan55
Mechanic
Vocational, Technical or Trade Scho
300 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!
Los Angeles, CA
Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.
Hesperia, CA
I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.
Kernersville, NC
Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.
Woodstock, NY
Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.
Elkton, Maryland
He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.
Dallas, TX
< Previous | Next >
Meet the Experts:
Curtis B.
Technician
2,524 satisfied customers
Technican turned service manager with multiple lines of equipment and rental units.
Wayne
Journeyman
1,478 satisfied customers
worked on many road graders, Bull dozers , skid steers, Rollers
Cat Man
Cat Engine Expert
578 satisfied customers
I am ASE Master Certified.
dieseldan55
Mechanic
300 satisfied customers
Road Mechanic for Volvo Construction Equipment.
Chris (aka- Moose)
Technician
97 satisfied customers
24 years of experience diagnosing & repairing
cumminsdr
Mechanic
70 satisfied customers
Cummins field tech
Steve
Mechanic
42 satisfied customers
Heavy Equipment Mechanic for 25 years
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
