I have a Galion eight inch hydraulic cylinder that I’m trying to rebuild. I locked the box in the up position and

Hello! Let's see if we can work together and come to a satisfactory conclusion!

Can you attach a picture? From what you have described the gland should come out, the four bolts should have been the retaining bolts. be sure the other end of the cylinder is open and the hose is off. Then if it will not come out, tap on it, to see if it knocks in, to expose a set of inner rings.

Looks like the 4 bolts would hold the ring in place.

Try tapping it in, to expose another set of rings.

Yes, I see them. What are the four cavities in the top part of the cap?

Looks like the cap still has four bolts in the top! Have you removed them?

OK> is it still going in?

That's not a ring in the top of the barrel?

Maybe it will tap in further?

K>

Good job! Thanks for the update.

Not sure what purpose they would play.

Yes.

OK>