I need the fuel injection timing procedure for a cat 262c skid steer. I need to replace the pump. Cat serial

Hey, sorry to hear you are having these problems. I know that can be frustrating. Hopefully, we can get you back to work quickly. I see no one could help you earlier, and I hope this is not too late to be helpful. Please note that I am not set up for phone calls, you can ignore the site pop-ups. We can post to this chat as much as you like to work through this issue. All experts are not employees, and we work from home in our spare time to answer questions.

Can you verify the serial number is *****?

You asked for the procedure for a 262C but the serial number is ***** a 246C. I need the correct serial number to find the proper procedure.

Yes, that would be correct but, the manuals describe the rear of the engine as the flywheel end. Keep this in mind in case you need to verify which cylinder is which.

Use this link to see the details for timing the pump. The C3.4 and the 3044C are nearly identical so, both reference the same marks.

https://drive.google.com/file/d/0B8Gc4s_tr2LzcHoxNGJoQ1NuSzg/view?usp=sharing

By the way, if the injectors don't have hold down clamps and bolts, it is threaded into the head.

Thank you for using JustAnswer, if you do need further help please let me know.

If you are satisfied with my service, please take a moment to provide a rating.

Thanks again, Don

CATMASTERTECH