Construction and Road Equipment

Construction and road equipment repair questions? Ask a mechanic ASAP

Ask an Expert,
Get an Answer ASAP!

This answer was rated:

I am working on a JCB950 tier4 S/N JCB95004H02364014 Getting…

I am working on a...
I am working on a JCB950 tier4
S/N JCB95004H02364014
Getting these codes can you tell me what the codes are
P0091
P1108
P110A
P1106
P1104
Show More
Show Less
Ask Your Own Construction and Road Equipment Question
Answered in 19 minutes by:
3/21/2018
Wayne
Wayne, Journeyman
Category: Construction and Road Equipment
Satisfied Customers: 11,301
Experience: worked on many road graders, Bull dozers , skid steers, Rollers
Verified

Hi, I’m Wayne.

I will be assisting you with this issue today.

Give me a bit to look these up

Wayne

Ask Your Own Construction and Road Equipment Question
Customer reply replied 4 months ago
Thank you

HI

P0091 is fuel regulator failed

P1108 manifold pressure sensor

P110A can not find

P1106 Manifold Absolute Pressure/Barometric Pressure Circuit Range P 1104 ...means the mass airflow sensor is not functioning properly, likely due to a faulty sensor or bad electrical connection

I hope this helps you

Wayne

My goal is to give you the best experience possible.

I hope that I have earned a 5-star rating

Found at the top of the screen before you leave today.

If you need more assistance, please use the reply box and let me know.​

Wayne
Wayne, Journeyman
Category: Construction and Road Equipment
Satisfied Customers: 11,301
Experience: worked on many road graders, Bull dozers , skid steers, Rollers
Verified
Wayne and 87 other Construction and Road Equipment Specialists are ready to help you
Ask your own question now
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Wayne Your Own Question
Wayne
Wayne
Wayne, Journeyman
Category: Construction and Road Equipment
Satisfied Customers: 11,301
11,301 Satisfied Customers
Experience: worked on many road graders, Bull dozers , skid steers, Rollers

Wayne is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Curtis B.

Curtis B.

Technician

1,409 satisfied customers

Technican turned service manager with multiple lines of equipment and rental units.

Wayne

Wayne

Journeyman

11,301 satisfied customers

worked on many road graders, Bull dozers , skid steers, Rollers

Cat Man

Cat Man

Cat Engine Expert

517 satisfied customers

I am ASE Master Certified.

dieseldan55

dieseldan55

Mechanic

273 satisfied customers

Road Mechanic for Volvo Construction Equipment.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

42 satisfied customers

16 years of experience

Steve

Steve

Mechanic

42 satisfied customers

Heavy Equipment Mechanic for 25 years

JBFixxer

JBFixxer

Mechanic

20 satisfied customers

16+ years experience, hydraulics,hydrostatics, engines, fuel injection systems. And everything in between.

< Previous | Next >

Related Construction and Road Equipment Questions
I have a Massey Ferguson / New Holland model 600 backhoe I
I have a Massey Ferguson / New Holland model 600 backhoe I am told is from the 1980's (unconfirmed) that won't start. A mechanic replaced the two upper filters and I am told there is one other filter … read more
Curtis B.
Curtis B.
Technician
Associate Degree
1,409 satisfied customers
I am working on a Haulotte scissors lift m/n 2632E with an
Hi, I am working on a Haulotte scissors lift m/n 2632E with an error code AL98. Will not power up. Discharge indicator blinks red. Tested batteries and fuses. … read more
Jeremy
Jeremy
Technician
Vocational, Technical or Trade Scho
104 satisfied customers
Can you tell me if the fuel regulator is built into one of
Can you tell me if the fuel regulator is built into one of the pump as I'm not finding one… read more
Dan
Dan
Auto Mechanics 1&2/diesel mech
I am doing a reparation of a Caterpillar 428C Backhoe Loader
Hi, I am doing a reparation of a Caterpillar 428C Backhoe Loader 8RN00001-04088 but can't seem to find the parts manual to see the exploded view in order to find the parts to change. Could you help me… read more
Curtis B.
Curtis B.
Technician
Associate Degree
1,409 satisfied customers
I have a 1988 bobcat .The wiring bunt up to the solonoids. I
I have a 1988 bobcat .The wiring bunt up to the solonoids. I repaired that . everything works accept the bucket will not tilt back nforth. Or up n down. Any ideas … read more
Curtis B.
Curtis B.
Technician
Associate Degree
1,409 satisfied customers
How do I unlock a T870 Bobcat Boom, Bobcat T870 Skidsteer
Will I be able to print out his instructions because I am not the person operating the machine… read more
Dan
Dan
Auto Mechanics 1&2/diesel mech
We are working on a Cat 320c lu s/n pac01044 The track drive
we are working on a Cat 320c lu s/n pac01044 The track drive planetary is leaking. To change the seal do we pull the drive motor or take the planetary apart or all of the above. Thanks Fred… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
We have a 2012 KPI JCI 4250 crusher with a Cat C13 engine.
Hello, we have a 2012 KPI JCI 4250 crusher with a Cat C13 engine. Engine is derated now because DPF is at 113% full. When we try to do a forced regen, engine speed increase for a minute or so, and the… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
Have a 773 bobcat. Just had the control valve resealed and
Have a 773 bobcat. Just had the control valve resealed and now will not lift boom and lift, tilt light flashing… read more
Fieldtech59
Fieldtech59
254 satisfied customers
The bobcat stalled and will not restart, it has a light with
the bobcat stalled and will not restart, it has a light with a coil in what appears to be a light bulb picture. the codes are 12-10. any ideas of what might be going on? … read more
Curtis B.
Curtis B.
Technician
Associate Degree
1,409 satisfied customers
Lift n tilt not working light flashes every few second,s,
Lift n tilt not working light flashes every few second,s … read more
Dan
Dan
Auto Mechanics 1&2/diesel mech
What bore diameter is necessary to install sleeves in a Cat
What bore diameter is necessary to install sleeves in a Cat 3204 engine. Is it possible to bore without pulling engine.… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
517 satisfied customers
I'm working on a 2009 s185, the problem is the tilt, lift
I'm working on a 2009 s185, the problem is the tilt, lift functions are not working, the bics is giving me a code m3204, I have switched and unswitched power to the acs controller but don't get any si… read more
Bradley Martin
Bradley Martin
16 satisfied customers
HAVE A 773G BOBCAT SKID STEER/ S/N-###-##-#### CONTROLS
HAVE A 773G BOBCAT SKID STEER/ S/N-###-##-#### CONTROLS WILL NOT UNLOCK. YOU CAN USE OVERRIDE SWITCH AND IT WILL TRAVEL,BUT NO LOADER FUNCTIONS. CHECKED CODES,SHOWING [NONE]… read more
Fieldtech59
Fieldtech59
254 satisfied customers
Hi there, Ive got a 5TJ modle D8N thats got a loud howl in
Hi there, I've got a 5TJ modle D8N that's got a loud howl in the drivetrain and can't figure out what it is, the oil in the trany and final drives was changed about 1000 hours ago and is still very cl… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
We have a 924G wheel loader s/n dda01529. Engine s/n cpt10502.
We have a 924G wheel loader s/n dda01529. Engine s/n cpt10502. Arr number179-1796. Can you help us out with the injection pump timing procedure?… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
517 satisfied customers
the harness wiring has been pulled from the plug. just need
the harness wiring has been pulled from the plug. just need to know which wires go into which pin connection on the broom plug. its a CAT BA18 sweeper broom attachment on a CAT skidsteer.… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
517 satisfied customers
I got a 128 254 8 code on my scanner on a QSB4.5 engine s/n
I got a 128 254 8 code on my scanner on a QSB4.5 engine s/n 30206796 can you point me in the right direction with this problem… read more
DR.Cummins
DR.Cummins
Field Service
High School or GED
2,254 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x