Construction and Road Equipment

Construction and road equipment repair questions? Ask a mechanic ASAP

Ask an Expert,
Get an Answer ASAP!

2007 D6 bulldozer hydraulic oil overheated. I look forward…

Customer Question
2007 D6 bulldozer hydraulic...

2007 D6 bulldozer hydraulic oil overheated .

Mechanic's Assistant: Sometimes things that you think will be really complicated end up being easy to fix. The Heavy Equipment Mechanic I'm going to connect you with knows all the tricks and shortcuts.

I look forward to hearing from him. A buzzing noise is there when i am not moving the blade or rippers.It stops when i move the blade

Mechanic's Assistant: Are you fixing this yourself? What have you tried so far?

No I have only had this dozer a couple of months and is the first fault i have come across.

Mechanic's Assistant: Anything else you want the equipment mechanic to know before I connect you?

When lowering the blade or ripper shudders a little.

Submitted: 10 months ago.Category: Construction and Road Equipment
Show More
Show Less
Ask Your Own Construction and Road Equipment Question
Answered in 13 hours by:
10/4/2017
Mechanic: Dan, Technician replied 10 months ago
Dan
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 6,887
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
Verified

Hi my name is***** will be glad to help. D6M? What is your serial number machine?

Ask Your Own Construction and Road Equipment Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Curtis B. Your Own Question
Curtis B.
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1,460
1,460 Satisfied Customers
Experience: Technican turned service manager with multiple lines of equipment and rental units.

Curtis B. is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Curtis B.

Curtis B.

Technician

1,460 satisfied customers

Technican turned service manager with multiple lines of equipment and rental units.

Wayne

Wayne

Journeyman

650 satisfied customers

worked on many road graders, Bull dozers , skid steers, Rollers

Cat Man

Cat Man

Cat Engine Expert

517 satisfied customers

I am ASE Master Certified.

dieseldan55

dieseldan55

Mechanic

273 satisfied customers

Road Mechanic for Volvo Construction Equipment.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

42 satisfied customers

16 years of experience

Steve

Steve

Mechanic

42 satisfied customers

Heavy Equipment Mechanic for 25 years

JBFixxer

JBFixxer

Mechanic

20 satisfied customers

16+ years experience, hydraulics,hydrostatics, engines, fuel injection systems. And everything in between.

< Previous | Next >

Related Construction and Road Equipment Questions
My Kamatsu Bulldozer is model D21P. The clutch pedal on the
My Kamatsu Bulldozer is model D21P. The clutch pedal on the left side of the floorboard has always worked fine however about a week ago when I put my foot on the clutch pedal and pushed it all the way… read more
Dan
Dan
Technician
6,887 satisfied customers
I have a question on a 1983 Deere 550 dozer. Do not have any
Hi, I have a question on a 1983 John Deere 550 dozer. Do not have any books that go with the dozer, need to know if the hydraulic fluid reservoir (underneath the right side of the tractor saddle box n… read more
Curtis B.
Curtis B.
Technician
Associate Degree
1,460 satisfied customers
D8k ser. 77v3434 equipped with 183b ser.41v6949 hyd. system
d8k ser. 77v3434 equipped with 183b ser.41v6949 hyd. system with ripper. anytime ripper is raised and ripper control lever is returned to neutral position main pressure go's over relief @ 2000 psi. th… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
IH bulldozer after changing fluid and filters and running
IH bulldozer after changing fluid and filters and running for three hours machine barely moves forward or backward… read more
Dan
Dan
Technician
6,887 satisfied customers
I have a 2008 cat d6t serial number skl00513 that the
I have a 2008 cat d6t serial number skl00513 that the hydraulics have be come very week ie. Cycle very slow will barely pick up machine and are a bit noisy when turning. Any ideas? Can i check pump pr… read more
Dan
Dan
Technician
6,887 satisfied customers
I have a cat d4g XL its been sitting up few months so when I
I have a cat d4g XL its been sitting up for a few months so when I went move it the transmission would drop out of third gear to first. If I shut it off I could move the transmission back to third but… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
I have a series 2 d6h which has a heating problem in the
Hello I have a series 2 d6h which has a heating problem in the transmission I have resealed and put new brakes in both sides and was getting 400 psi at the test ports could it be the trans pump… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
I have a John Deere 450C dozer. 1976 model. Dozer was fine
I have a John Deere 450C dozer. 1976 model. Dozer was fine when parked in April. This morning it fails to engage transmission. runs fine. hydraulics for blade are operating. I have tried different gea… read more
Dan
Dan
Technician
6,887 satisfied customers
Cat d11 r cylinder drift down , while engine running and stopped!
Cat d11 r cylinder drift down , while engine running and stopped! Cylinder bypass has been checked- all ok! Oil is being is being back fed through pilot control valve! Any ideas? Back fed… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
Im having trouble with my CAT D3 Dozer. It will not tram (go
I'm having trouble with my CAT D3 Dozer. It will not tram (go into gear) forward. It will only tram somewhat in the backwards gear. I don't know what the problem could be.… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
D6T quick drop valve doesnt work all the time. Itll work at
D6T quick drop valve doesn't work all the time. Itll work at full throttle when cold but i have to play with it once the oil gets hot. When the oil is hot and the engine at idle it will not engage qui… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
My 6 way blade on D-5 dozer is very stiff with no way to grease
My 6 way blade on D-5 dozer is very stiff with no way to grease it. I need to loosen it up for easier control but don't see any adjustments… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
I have a 1970 John Deere 350 Bulldozer, Model No: 1 (might
I have a 1970 John Deere 350 Bulldozer, Model No: 1 (might be 'L').. 14F3D. I lost the water pump. I took off nose, radiator and water pump. I need to replace hoses/fan belt/water pump/all gaskets. I … read more
Dan
Dan
Technician
6,887 satisfied customers
I bought a rebuilt Cat D8H 46A and it runs great except for
I bought a rebuilt Cat D8H 46A and it runs great except for one problem. I suspect a dirty filter or hydraulic line. 4 times while working it I lost the transmission. It shut off, no response to shift… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
cat excavator 304 cr: I have a 304 cr cat excavator with low
I have a 304 cr cat excavator with low Pressure until I lower the push blade Down and hold it every thing works for a min and then slows to a stop tracks boom stick and all. Also noticed when you move… read more
Al-Moderator
Al-Moderator
High School or GED
d7A DOZER CAME TO DEAD STOP ABLE BACK UP DOZER LENGTH NOT ONLY
d7A DOZER CAME TO DEAD STOP ABLE BACK UP DOZER LENGTH NOT ONLY MOVE 2FT FORWARD AND THE SAME DISTANCE BACK FEELS IF SOMETHING LOCKS UP WHERE DO i START LOOKING THANKS… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,287 satisfied customers
Would a bulldozer such as Cat D7 be able to create piles of
Would a bulldozer such as Cat D7 be able to create piles of fill from grade level ? or would the blade need some sort of teeth or anything? im trying to remove some clay fill in back of a home and was… read more
don
don
fleet superintendent
Vocational, Technical or Trade Scho
12 satisfied customers
I have recently purchased a used Cat D8k77v3194 It is equiped
I have recently purchased a used Cat D8k77v3194 It is equiped with a 3 rd valve for a ripper attachment. When I 1st start the tractor the hydraulic system works perfectly. After operating the machine … read more
Dan
Dan
Technician
6,887 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x