How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask catmastertech Your Own Question
catmastertech
catmastertech, Technician
Category: Construction and Road Equipment
Satisfied Customers: 2366
Experience:  Field service technician for CAT 19 years.
11546476
Type Your Construction and Road Equipment Question Here...
catmastertech is online now
A new question is answered every 9 seconds

I have a 113 serv code 623.02 168.04 668.12 673.02 70.02 30

Customer Question

I have a 113 serv code
623.02
168.04
668.12
673.02
70.02
30
671.02
299.08
299.03
36
398.2
232.2
122
687.2
1250.9
30
179.3
Submitted: 1 month ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 1 month ago.

Hello,

What is your tractor's complete serial number?

Customer: replied 1 month ago.
Djy01493
Expert:  catmastertech replied 1 month ago.

Great. I will check the codes and post back.

Which codes are active?

Or are all of these just logged?

Expert:  catmastertech replied 1 month ago.

Here is what I found. Some may need to be verified as to the correct code number.

113 is for transmission codes

623.02 Direction Switch: FMI 02 Data erratic, intermittent, or incorrect.

168.04 Electrical System: FMI 04 Voltage below normal or shorted low.

668.12 Transmission Shift Lever: FMI 12 Bad device or component.

673.02 Transmission Output Speed 2 Sensor: FMI 02 Data erratic, intermittent, or incorrect.

70.02 Parking Brake Switch - ON/OFF Pole: FMI 02 Data erratic, intermittent, or incorrect

30 is for monitor codes

671.02---not a monitor code, maybe transmission 113

671.02 Transmission Output Speed 1 Sensor: FMI 02 Data erratic, intermittent, or incorrect.

299.08---not a monitor code, maybe transmission 113

299.08 Transmission Direction Lever Position Sensor: FMI 08 Abnormal frequency, pulse width, or period.

299.03---not a monitor code, maybe transmission 113 also no FMI-03 exist for this component. Only 08 and 13.

299.13 Transmission Direction Lever Position: FMI 13 Out of calibration.

36 is for engine codes

398.2 Low Fuel Rail Pressure - Derate (This is actually an Event code and should have the letter E in front of it.E398.2)

232.2 High Fuel/Water Separator Water Level - Derate (E232.2)

122 is for Product Link radio

687.2 Options ID code FMI 02 Data erratic, intermittent, or incorrect. (Stange number, it does not match for this machine serial number. Could it be different?)

1250.9 Remote Communication Module FMI 09 Unable to establish communication

30 monitor

179.3---unknown number.

Expert:  catmastertech replied 1 month ago.

Did this answer your question? Do you need further help?

Please let me know.