Construction and Road Equipment

Construction and road equipment repair questions? Ask a mechanic ASAP

Connect one-on-one with {0} who will answer your question

This answer was rated:

Have 1850 oliver with depth stop hydraulic system. I have…

Have 1850 oliver with...

Have 1850 oliver with depth stop hydraulic system. I have lost hydraulic pressure and power steering at low rpm, 15-1600rpm i have powersteering. and will not operate a hyd cylinder even with no load at full rpm Have checked pressure relief sping and tried more shims on help,also checked power divider and things seem as they should. What else do I check?

Mechanic's Assistant: What is the complete model and serial number of your machine?

1966 oliver 1850 wheatland serial #1700054-427

Show More
Show Less
Ask Your Own Construction and Road Equipment Question
Answered in 1 minute by:
6/9/2017
Mechanic: Curtis B., Technician replied 5 years ago
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 43,612
Experience: Technican turned service manager with multiple lines of equipment and rental units.
Verified

Hello! Let's see if we can work together and come to a satisfactory conclusion!

what is hydraulic pressure? Sounds like the hydraulic pump is not capable of handling the pressure.

Ask Your Own Construction and Road Equipment Question
Customer reply replied 5 years ago
took hyd unit off and found split in outlet tube from pump. Please cancel subscription. Thankyou
Mechanic: Curtis B., Technician replied 5 years ago

So it was pump problem. Good job! Please rate using the rating system to close the question and get me credit! Thanks.

Ask Your Own Construction and Road Equipment Question
Customer reply replied 5 years ago
Trying to rate but won,t accept or submit
Mechanic: Curtis B., Technician replied 5 years ago

!! Let me open it up!

Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 43,612
Experience: Technican turned service manager with multiple lines of equipment and rental units.
Verified
Curtis B. and 87 other Construction and Road Equipment Specialists are ready to help you
Ask your own question now
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Curtis B. Your Own Question
Curtis B.
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 43,612
43,612 Satisfied Customers
Experience: Technican turned service manager with multiple lines of equipment and rental units.

Curtis B. is online now

Related Construction and Road Equipment Questions
Case 580M no hydraulics, power steering. Transmission is
Case 580M no hydraulics, power steering. Transmission is working I have the bucket down but I can engage forward & reverse directions. Hyd fluid is full but no work attachments function and power stee… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
ALL HYDRALIC FUNCTIONS SIMULTANIOUSLY STOPPED WORKING EXCEPT
ALL HYDRALIC FUNCTIONS SIMULTANIOUSLY STOPPED WORKING EXCEPT HYDROSTAIC DRIVE ON 480B … read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,325 satisfied customers
I am needing support in trouble shooting the steering on a
I am needing support in trouble shooting the steering on a 350b telehandler … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
L 90F hydraulics stop working. L 90f 29073. When I
when I disconnected the wires on the solenoid valve next to the compensator every thing works fine but it says Hyd pump failed … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
I have a Volvo 140 BLC and just installed a thumb and was
HI I have a Volvo 140 BLC and just installed a thumb and was able to adjust the pressure down to 1850 on one side of the valve bank but I can find the adjustment for the other side? … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
I have a 2000 Bobcat 873G series 2 speed skidsteer with the
Hi I have a 2000 Bobcat 873G series 2 speed skidsteer with the electric hand controls. Everything operates fine( runs and drives and lifts fast and strong) however the bucket curls slow. It does work … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
I have a c185 with a hydraulic auger 7 can't get the auger
i have a c185 with a hydraulic auger 7 can't get the auger to spin … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
I have a Cat TL943 with a TBL serial number. The steering
I have a Cat TL943 with a TBL serial number. The steering locks up intermittently. Is seems to mainly happen before the machine is warmed up, but is somewhat random. It seems to happen in front axle 2… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,325 satisfied customers
I working on a WB 146-5 s/n A23103. On start-up Hydraulics
I working on a WB 146-5 s/n A23103. On start-up Hydraulics work fine, but with in 10 to 15 mins. of operation system starts to over pressure and will pull the rpm down and kill the engine. Can then on… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
Oliver 1850 hydraulic levers are leaking and will not pick
Oliver 1850 hydraulic levers are leaking and will not pick up front end loader … read more
Curtis B.
Curtis B.
Technician
Associate Degree
43,612 satisfied customers
75c with 4 remotes. Line 1 does not seem to have any
75c with 4 remotes. Line 1 does not seem to have any pressure for lifting implement. Other 3 lines operate normally. What is happening with line 1 … read more
Curtis B.
Curtis B.
Technician
Associate Degree
43,612 satisfied customers
We have a Sumitomo SH160-5g6, Sorry i bumped the buttons ill
The problem is the egine stalls on hydraulic releif at idle and starting off from auto idle. we have changed the PSV on pump one (no change) and checked the computer settings to factory specs (no change), Checked pilot pressure. In spec, Main relief in spec … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
We have an kobelco sk250 ic. recently we had some electrical
we have an kobelco sk250 ic. recently we had some electrical issues and now the machine runs good but when you start a function, boom in boom out bucket in out. any digging or drive function causes th… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
When I start my case 1825 skid steer at 32 to 60 degrees I
When I start my case 1825 skid steer at 32 to 60 degrees I will not be able to move it.. some times it moves 50 to 200 feet then stops. The charging lite is on. I have changed the hyd fileter and I no… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
Liebherr 622r engine starts and the hydraulic bucket and
Liebherr 622r engine starts and the hydraulic for the bucket and rippers work but cannot get the tracks to move, did the correct starting procedure with the isolation lever, what's your thoughts… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
I have a bl60 backhoe,it started to slow down on the hydraulics
I have a bl60 backhoe,it started to slow down on the hydraulics and the lifts have become very weak. I have replaced the filters and fluid that did help but not enough. The front bucket and rear hoe a… read more
dieseldan55
dieseldan55
Mechanic
Vocational, Technical or Trade Scho
299 satisfied customers
My CX225SR excavator looses power when digging a full bucket
My CX225SR excavator looses power when digging a full bucket scoop, bring the bucket back up and the power returns what may be the cause.… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
Ihave a 305 cat excaviator with an hyd problem can start work
Ihave a 305 cat excaviator with an hyd problem can start work for one or two hrs then it loose power in hyds pump pressures check ok could the problem be in the control valve or the pressure relife va… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
1,216 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Curtis B.

Curtis B.

Technician

43,612 satisfied customers

Technican turned service manager with multiple lines of equipment and rental units.

Wayne

Wayne

Journeyman

1,298 satisfied customers

worked on many road graders, Bull dozers , skid steers, Rollers

Cat Man

Cat Man

Cat Engine Expert

578 satisfied customers

I am ASE Master Certified.

dieseldan55

dieseldan55

Mechanic

299 satisfied customers

Road Mechanic for Volvo Construction Equipment.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

85 satisfied customers

24 years of experience diagnosing & repairing

Steve

Steve

Mechanic

42 satisfied customers

Heavy Equipment Mechanic for 25 years

JBFixxer

JBFixxer

Mechanic

22 satisfied customers

16+ years experience, hydraulics,hydrostatics, engines, fuel injection systems. And everything in between.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x