How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1169
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 2008 TL943 CAT telehandler which is not releasing

Customer Question

HI I have a 2008 TL943 CAT telehandler which is not releasing the front brakes properly. Just had Front axle seals repaired by service shop and was putting it back in place when I noticed I couldn't spin front tires with machine being lifted of. I did a manual release on the front axle brakes and I could spin the tires. I believe that the dragging brakes might have caused the seals to go in the first place. Any suggestions what to do to get the brakes fully released? Thanks
Submitted: 11 months ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 11 months ago.

What is your serial number and what kind of axle do you have?

Related Construction and Road Equipment Questions