How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 28325
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How do i bleed the hydronic system

Customer Question

how do i bleed the hydronic system
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 1 year ago.

What is happening? The hydraulic system should not require bleeding. It is elf bleeding, just by cycling the cylinders a few times to clear any air. Same for the drive system!

Customer: replied 1 year ago.
we have put new seals in the control arm that operates the 3 in one bucket
and it seems to be a times a bit slow in responding
as if the is air in the lines
Expert:  Curtis B. replied 1 year ago.

All that s required is to cycle the cylinder a few times to let any trapped oil return to the tank. Slow movement can be a restricted line or fitting, anywhere from the control valve, to the cylinder hoses and back to the control valve. Did the old cylinder come apart? Seals damaged? If so, pieces from the old seal may be plugging an orifice.

Expert:  Curtis B. replied 1 year ago.

Did you find the problem?

Related Construction and Road Equipment Questions