How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85, Technician
Category: Construction and Road Equipment
Satisfied Customers: 514
Experience:  Service amanger for over 15 years
Type Your Construction and Road Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

P .t.o. shafts has smaller hole for shear key on overidea

Customer Question

P .t.o. shafts has smaller hole for shear key on overidea clutch 1941 allis b do I have the right part if not what is the correct part #
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  dd85 replied 1 year ago.
Are you referring to an overrunning clutch that you are attaching to the Tractor PTO shaft? and a "roll pin" that holds the over running clutch on? If so you will need to get a smaller roll pin that fits the PTO shaft. the Grease zert and plug in the over running clutch will hold in place

Related Construction and Road Equipment Questions