How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 5155
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
Type Your Construction and Road Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

How do I remove the injection pump from the gear on a pc60

Customer Question

How do I remove the injection pump from the gear on a pc60 Komatsu
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 1 year ago.

Typical pump is removed by using a small puller, bolted to the gear and then used to push the shaft out of the gear.

Customer: replied 1 year ago.
That much I could have presumed I needed more specific information to get pump off of machine out in field
Expert:  Curtis B. replied 1 year ago.

I do not have manual for it. I will opt out, and see if anyone else can furnish you with required information. Sorry.

Expert:  Dan replied 1 year ago.

Hi my name is***** will try to help. What is the complete model with dashes and serial number?

Related Construction and Road Equipment Questions