How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1166
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
30244710
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Link belt rtc 8090 series 11.trying to retrack

Customer Question

Link belt rtc 8090 series 11.trying to retrack boom.nonething will engage.not out of sync. Try remotely to retrack. Dosnt work.no system errors on screen .says sensor error. And when push or pull retrack screen says ..start up
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Bradley Martin replied 1 year ago.

Have you tried turning the bypass key to bring the boom back in?

Customer: replied 1 year ago.
Expert:  Bradley Martin replied 1 year ago.

The boom still does not come in with the bypass key.

Customer: replied 1 year ago.
Remote got it to wrk
Expert:  Bradley Martin replied 1 year ago.

Ok that was going to be my next solution. When you brought it in does it still say sensor error?

Expert:  Bradley Martin replied 1 year ago.

do you have any other issues?

Related Construction and Road Equipment Questions