How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 28119
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Bobcat SB 200 auger rotates fine but Chute controls 't work.

Customer Question

Bobcat SB 200 auger rotates fine but Chute controls don't work. I have power to all connections but when I have one or more electrical connections hooked up to the blower I get power to the ground when I engage either switch. I have tried connecting only each one of the four electrical connections and get the same result. Is this normal? If so what is the problem? I measure zero resistance thru each of the coils when all are disconnected.
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 1 year ago.

Solenoid coils are just electro magnets, do you have continuity through the coils? If no continuity, you have bad coils.

Expert:  Curtis B. replied 1 year ago.

Or test coils with battery voltage and ground.

Related Construction and Road Equipment Questions