How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 28669
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

How to bleed a new fuel filter on a 180

Customer Question

how to bleed a new fuel filter on a 180
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 1 year ago.

180? LS180? What do you have for fuel transfer/primer pump? Dose filter housing have manual diaphragm on top of filter housing? Does filter housing have electric pump?

Expert:  Curtis B. replied 1 year ago.

The fuel system has to be opened past the filter, then pump is used to pump the fuel into the system, and to get all the air out. With diaphragm pump, you have to ,manually pump it. With electric pump, you have to turn the key on and let the pump run.

Expert:  Curtis B. replied 1 year ago.

Or it can have transfer pump on side of block, that has lever that has to be pumped manually. Bleed screw will either be on filter housing or at the injection pump, near the inlet line.