How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1231
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I own a 36 inch gyradisc and need to produce maximum fines I

Customer Question

hi I own a 36 inch gyradisc and need to produce maximum fines I am crushing ferro chrome slag and need to process through spiral recovery plant feed is typically max .9 inch what should I set closed side setting at
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  Dan replied 1 year ago.

Hi my name is***** will be glad to try to help. What is the serial number of your crusher? also here is some literature for this model as well.

I will be out of the office for a few in a meeting but will check into the specs you need whenI return and have your serial number.