How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 1176
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have Cat IT28G serial 8CR00572. The tractor will move

Customer Question

Have Cat IT28G serial 8CR00572. The tractor will move forward and back in first gear. It will not shift into 2nd or 3rd. Checked fuses nothing else need a place to begin.
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 1 year ago.


How long have you had this machine?

Are you familiar with the diagnostic lamp?

Did you check the operation of the downshift button in the lift control lever?

Do you have any warning lights on?

Does this machine have the remote transmission direction control switch on the loader control lever?

Is the autoshift switch off?

Use the attached file to see how you can view the diagnostic lamp flash codes. This will greatly reduce the troubleshooting time needed.

This lamp is located under the cab directly below the fuse panel area.

Related Construction and Road Equipment Questions