Construction and Road Equipment

Construction and road equipment repair questions? Ask a mechanic ASAP

Connect one-on-one with {0} who will answer your question

Have problem with furukawa fl 270i wheel loader no torque on…

Customer Question
have problem with furukawa fl...
have problem with furukawa fl 270i wheel loader no torque on wheels shaft from torque converter to transmission stand still under pressure on all gears except for 1 and 3 on forward shaft spins but no drive on wheels
Submitted: 7 years ago.Category: Construction and Road Equipment
Show More
Show Less
Ask Your Own Construction and Road Equipment Question
Answered in 54 minutes by:
9/21/2015
Mechanic: Dan, Technician replied 7 years ago
Dan
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 15,116
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
Verified

Hi my name is***** will be glad to help. First check and cut open the transmission filter and look for metal indicating an internal failure. Also check the suction screen at the bottom of the transmission for signs of metal of friction material that would also indicate internal problems requiring overhaul. If clean you could possibly have a failed transmission charge pump. To confirm this you will need the pressure specs for your serial number machine to test the transmission pressures to see if they are in specs. If you find aluminum in the filter it is a converter problem and if so you might be able to get by with a new converter and charge pump unless you find a lot of metal or friction material in the transmission and the oil is burnt and discolored. Let me know

Ask Your Own Construction and Road Equipment Question
Customer reply replied 7 years ago
will respond on Monday thanks
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Dan Your Own Question
Dan
Dan
Dan, Technician
Category: Construction and Road Equipment
Satisfied Customers: 15,116
15,116 Satisfied Customers
Experience: 17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.

Dan is online now

Related Construction and Road Equipment Questions
I have a D7R dozer that had the engine replaced. Now the
Hi I have a D7R dozer that had the engine replaced. Now the dozer will not move forward or reverse, but it turns left and right. The drive shaft will move when turning other then that it doesn't think… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,325 satisfied customers
I have a Michigan loader 75 3A that has a good strong motor
I have a Michigan Clark loader 75 3A that has a good strong motor and good hydraulic lift but does not want to move very well … read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
Having trouble with a TH580B CAT telehandler. It won't
Having trouble with a TH580B CAT telehandler. It won't drive, only does a slight lurch backwards when selecting either forward or reverse. No codes active. … read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,325 satisfied customers
I have a 1977 Furukawa Fl 120 wheel loader. It has a auto
I have a 1977 Furukawa Fl 120 wheel loader . It has a auto clutch type trans I believe , it has forward reverse and 4 gears also has a clutch but u do not need to use it to shift from forward or rever… read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
I have a 2002 case 621D loader and while in use one day it
I have a 2002 case 621D loader and while in use one day it just stopped. It will start, idle and rev up fine but it has zero hydraulics. No bucket controls, no forward or reverse, and no steering. The… read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
175c Michigan loader with Cummins. Bought it a couple months
175c clark Michigan loader with Cummins. Bought it a couple months ago and thought maybe I had to rev a little higher then normal to get going but it could still spin it's tires going into gravel pile… read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
Ihave an IT28 8CR00835 Lost all implements and steering and
This is for Catmastertec Ihave an IT28 8CR00835 Lost all implements and steering and has no forward or reverse is it safe to say trans pump or the drive gear on the converter or gear that drives pumps… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,325 satisfied customers
Have a 2005 Case 1650k won't move forward or backward.
Have a 2005 Case 1650k won't move forward or backward. Replaced both line charge pump, brake pump and torque converter. Two dealers have worked on it and can't seem to fine the problem and also replac… read more
Dan
Dan
Technician
Auto Mechanics 1&2/diesel mech
15,116 satisfied customers
420e cat backhoe. Loud screeching from rear of engine when
420e cat backhoe. Loud screeching from rear of engine when shift into forward. Engine belts are all tight. Will not shift into 4th forward. 1-3 forward and 1-3 reverse work normal although engine spee… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,325 satisfied customers
Man I have a question on a 928g loader I have been doing
Man I have a question on a 928g loader I have been doing some test on the transmission I need a little bit of direction. Here are some of the test results on pressures at the test ports cold Port G is… read more
Dan
Dan
Technician
Auto Mechanics 1&2/diesel mech
15,116 satisfied customers
I have a allison transmission tt2421-1.i have fully over
hi i have a allison transmission tt2421-1.i have fully over hauled the trans and it still has no torque IE;wont spin tyres… read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
I have a Case 580 LE TLB. The transmission was overhauled
I have a Case 580 LE TLB. The transmission was overhauled by CASE, Cape Town, SA but still the machine does not move. Lifting the wheels and selecting reverse the wheels roll but no forward movement. … read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
I saw you answered questions Clark Loader 55c. I bought
I saw you answered questions for a Clark Loader 55c. I bought a same machine. On the loader arm is written 55b, but tag says 55 CA. It has a 6 cylinder cummins diesel which I think is V378. I bought i… read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
just bought a Terex 40 C wheel loader at auction. It appears
just bought a Terex 40 C wheel loader at auction. It appears to have a bad torque converter. What would you recommend? A shop rebuild, or remanufactured replacement or a junked machine? approximate co… read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
Cat 416d standard transmission wont move cold. No oil pressure
Cat 416d standard transmission won't move cold. No oil pressure at test port by trans oil filter. Once trans is about 60 degrees F. machine moves forward and reverse. Pressure is 185 psi at 2000 rpm t… read more
catmastertech
catmastertech
Field service technician
Vocational, Technical or Trade Scho
1,325 satisfied customers
Hi. For a Furukawa FL35-2 loader, I am seeking a electric circuit
For a Furukawa FL35-2 loader, I am seeking a electric circuit diagram (or perhaps a service manual), to fix electric faults. Any help to obtain greatly appreciated. Believe is FL35-2 model but not 100… read more
Wayne
Wayne
Journeyman
Vocational, Technical or Trade Scho
1,298 satisfied customers
Case 590 Super M Backhoe was backing up a steep hill, spinning
Case 590 Super M Backhoe was backing up a steep hill, spinning on dirt trying to get traction and backhoe just quit (no sound of any breaking parts). Electrical in transmission is OK (reverse & forwar… read more
Curtis B.
Curtis B.
Technician
Associate Degree
2,324 satisfied customers
I have a komatsu D65A-6, when it is first started and put into
I have a komatsu D65A-6, when it is first started and put into gear it does not want to dance away, it is very sluggish until the oil warms up but then the oil gets hot very quickly.1st gear reverse r… read more
Steve
Steve
Mechanic
High School or GED
42 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Curtis B.

Curtis B.

Technician

2,324 satisfied customers

Technican turned service manager with multiple lines of equipment and rental units.

Wayne

Wayne

Journeyman

1,298 satisfied customers

worked on many road graders, Bull dozers , skid steers, Rollers

Cat Man

Cat Man

Cat Engine Expert

578 satisfied customers

I am ASE Master Certified.

dieseldan55

dieseldan55

Mechanic

299 satisfied customers

Road Mechanic for Volvo Construction Equipment.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

85 satisfied customers

24 years of experience diagnosing & repairing

Steve

Steve

Mechanic

42 satisfied customers

Heavy Equipment Mechanic for 25 years

JBFixxer

JBFixxer

Mechanic

22 satisfied customers

16+ years experience, hydraulics,hydrostatics, engines, fuel injection systems. And everything in between.

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x