How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask catmastertech Your Own Question
catmastertech, Technician
Category: Construction and Road Equipment
Satisfied Customers: 2345
Experience:  Field service technician for CAT 19 years.
Type Your Construction and Road Equipment Question Here...
catmastertech is online now
A new question is answered every 9 seconds

Hyd bucket dump bleeding off 924 g cat

Customer Question

Hyd bucket dump bleeding off 924 g cat
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 1 year ago.


I am sorry no one could help you earlier. If you still need help, I would like to assist you with this problem.

Have you tried lifting the machine front wheels off the ground and see if the bucket can support the weight of the machine?

If it cannot and the tilt cylinder is drifting in both directions, it is likely the cylinder seals are the problem.

If it does hold the weight up fine (a little drift is ok) then the tilt relief valve may be your problem.

If you need detailed help with this issue, please post the full machine serial number with your reply.

Related Construction and Road Equipment Questions