How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Construction and Road Equipment
Satisfied Customers: 9794
Experience:  worked on many road graders, Bull dozers , skid steers, Rollers
Type Your Construction and Road Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have a1966 dozer work on the injector pump I need to no

Customer Question

I have a1966 dozer work on the injector pump I need to no how come the fuel is getting in the oil alsoknow how totime the pump
Submitted: 2 years ago.
Category: Construction and Road Equipment
Expert:  Wayne replied 2 years ago.

Hi I'm Wayne

I will help you with this

the fuel is getting into the oil from the Front pump seal,

this is common, set the engine to TDC

both valves loose on #1 cylinder, then remove the pump

from the engine, the pump shop will set and pin it back to TDC

after the seal is replaced, then just reinstall it

If this Helped you please Rate My Answer 3 stars or more

If you need more info

Use the request Button, not a Poor/Bad Rating

Thank You