How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask catmastertech Your Own Question
catmastertech, Technician
Category: Construction and Road Equipment
Satisfied Customers: 2334
Experience:  Field service technician for CAT 19 years.
Type Your Construction and Road Equipment Question Here...
catmastertech is online now
A new question is answered every 9 seconds

I have a service engine code that appereared on my cat D6

Customer Question

I have a service engine code that appereared on my cat D6 RXW series 2 dozer the code is(###) ###-####04
Submitted: 1 year ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 1 year ago.

Conditions Which Generate This Code:

The Electronic Control Module (ECM) detects a signal voltage that is below normal.

System Response:

The code is logged. The ECM flags oil pressure as invalid data and a default value is used.

There are no performance effects.
Test Step 1. Perform the following diagnostic procedure: Engine Pressure Sensor Open or Short Circuit - Test

Attached below is the test procedure for this code.

Related Construction and Road Equipment Questions