How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 28946
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a mustang 2054 skidsteer. I turn the key on and it

Customer Question

I have a mustang 2054 skidsteer. I turn the key on and it fires right off then dies. Will not stay running have checked the fuel shut off solenoid and the hold wire is not getting power. We can not find where this comes from so i was looking for a wiring diagram.
Submitted: 2 years ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 2 years ago.

The typical hold wire goes from keyswitch , to a relay, to the fuel solenoid. I don't have manual showing the Mustang. Follow the wire color from the solenoid to relay.

Expert:  Curtis B. replied 2 years ago.

Did you fin d relay?