How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask catmastertech Your Own Question
catmastertech, Technician
Category: Construction and Road Equipment
Satisfied Customers: 2356
Experience:  Field service technician for CAT 19 years.
Type Your Construction and Road Equipment Question Here...
catmastertech is online now
A new question is answered every 9 seconds

I have 939c I have replaced fuel filter and sediment bowl.

Customer Question

I have 939c I have replaced fuel filter and sediment bowl. If I prime it the machine will start and run real rough for a couple of minutes then die. I have to prime just to get it started I've had issues with fuel filters needing to be replaced after a couple of hours now it won't run
Submitted: 2 years ago.
Category: Construction and Road Equipment
Expert:  catmastertech replied 2 years ago.
Hello,Go to the transfer/lift pump on the side of the injection pump and remove the supply fitting bolt.Inside this bolt you will find a screen, remove the screen and clean it. This screen is not shown on PM service information and is often missed.If your machine is different, please post the full machine serial number with your reply.
Customer: replied 2 years ago.
Serial # ***** is that the bolt under the primer pump?