How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Construction and Road Equipment
Satisfied Customers: 28106
Experience:  Technican turned service manager with multiple lines of equipment and rental units.
Type Your Construction and Road Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Trying to adjust valve clearance on 310 backhoe. Where are

Customer Question

Trying to adjust valve clearance on 310 B backhoe. Where are the set screws? I see the hex nut.
Submitted: 2 years ago.
Category: Construction and Road Equipment
Expert:  Curtis B. replied 2 years ago.
The nut is the adjusting bolt. It is a self locking bolt and should stay where you set it. If the bolt gets where it does not hold the adjustment, the rocker assembly with new bolt is required!

Related Construction and Road Equipment Questions