How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Robert M. Your Own Question
Robert M.
Robert M., Consultant
Category: Computer
Satisfied Customers: 9104
Experience:  30 yrs. in NYC computer industry working with PC and networks, banks, brokerage, legal etc.
Type Your Computer Question Here...
Robert M. is online now
A new question is answered every 9 seconds

I have a dymo labeler and i was working on it and it went

Customer Question

i have a dymo labeler and i was working on it and it went out windows check and came back with a fatal error so i dont know how to take care of this
Submitted: 1 year ago.
Category: Computer
Expert:  Robert M. replied 1 year ago.

try removing it from the devices and printers folder

then rebooting and then attaching it again

if you have the original software you can try running that if it does not install again automatically.

or if you give me the exact model number i can find the install software for you.